[Opm] Difference between WellState::perfRates and WellStateFullyImplicitBlackoil::perfPhaseRates

[Jørgen Kvalsvik]

Quick tip on how to convert from surface rate to reservoir rate?

________________________________
From: Opm <opm-bounces at opm-project.org> on behalf of Atgeirr Rasmussen <Atgeirr.Rasmussen at sintef.no>
Sent: Monday, September 26, 2016 2:19:39 PM
To: OPM Mailing List
Subject: Re: [Opm] Difference between WellState::perfRates and WellStateFullyImplicitBlackoil::perfPhaseRates

The perfRates() vector contains *reservoir volume* total rates at the perforations, while the perfPhaseRates() vector contain
*surface volume* rates per phase. So it is not a direct sum.

Atgeirr


26. sep. 2016 kl. 14.10 skrev Jørgen Kvalsvik <JOKVA at statoil.com<mailto:JOKVA at statoil.com>>:

Hi,

What's the difference between these two vectors? Is perfRates just the sum of the pair/triples in perfPhaseRates?


-------------------------------------------------------------------
The information contained in this message may be CONFIDENTIAL and is
intended for the addressee only. Any unauthorised use, dissemination of the
information or copying of this message is prohibited. If you are not the
addressee, please notify the sender immediately by return e-mail and delete
this message.
Thank you
_______________________________________________
Opm mailing list
Opm at opm-project.org<mailto:Opm at opm-project.org>
http://opm-project.org/cgi-bin/mailman/listinfo/opm



-------------------------------------------------------------------
The information contained in this message may be CONFIDENTIAL and is
intended for the addressee only. Any unauthorised use, dissemination of the
information or copying of this message is prohibited. If you are not the
addressee, please notify the sender immediately by return e-mail and delete
this message.
Thank you
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <//opm-project.org/pipermail/opm/attachments/20160926/dfea4db6/attachment.html>