SatCurveMultiplexer.hpp

Go to the documentation of this file.

// -*- mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
// vi: set et ts=4 sw=4 sts=4:
/*
  This file is part of the Open Porous Media project (OPM).

  OPM is free software: you can redistribute it and/or modify
  it under the terms of the GNU General Public License as published by
  the Free Software Foundation, either version 3 of the License, or
  (at your option) any later version.

  OPM is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  GNU General Public License for more details.

  You should have received a copy of the GNU General Public License
  along with OPM.  If not, see <http://www.gnu.org/licenses/>.

  Consult the COPYING file in the top-level source directory of this
  module for the precise wording of the license and the list of
  copyright holders.
*/
#ifndef OPM_SAT_CURVE_MULTIPLEXER_HPP
#define OPM_SAT_CURVE_MULTIPLEXER_HPP

#include "SatCurveMultiplexerParams.hpp"

#include <stdexcept>


// The static_assert does not compile with gcc 12 and earlier (or nvcc) when placed in the multiplexer calls below.
#if (defined(__GNUC__) && (__GNUC__ < 13)) || defined(__CUDACC__)
    #define STATIC_ASSERT_SATCURVE_MULTIPLEXER_UNLESS_GCC_LT_13 throw std::logic_error("Unhandled SatCurveMultiplexerApproach")
#else
    #define STATIC_ASSERT_SATCURVE_MULTIPLEXER_UNLESS_GCC_LT_13 static_assert(false, "Unhandled SatCurveMultiplexerApproach")
#endif

namespace Opm {
template <class TraitsT, class ParamsT = SatCurveMultiplexerParams<TraitsT> >
class SatCurveMultiplexer : public TraitsT
{
public:
    using Traits = TraitsT;
    using Params = ParamsT;
    using Scalar = typename Traits::Scalar;

    using LETTwoPhaseLaw = TwoPhaseLETCurves<Traits>;
    using PLTwoPhaseLaw = PiecewiseLinearTwoPhaseMaterial<Traits>;

    using Traits::numPhases;
    static_assert(numPhases == 2,
                  "The Brooks-Corey capillary pressure law only applies "
                  "to the case of two fluid phases");

    static constexpr bool implementsTwoPhaseApi = true;

    static constexpr bool implementsTwoPhaseSatApi = true;

    static constexpr bool isSaturationDependent = true;

    static constexpr bool isPressureDependent = false;

    static constexpr bool isTemperatureDependent = false;

    static constexpr bool isCompositionDependent = false;

    static_assert(Traits::numPhases == 2,
                  "The number of fluid phases must be two if you want to use "
                  "this material law!");

    template <class Container, class FluidState>
    static void capillaryPressures(Container& values, const Params& params, const FluidState& fluidState)
    {
        switch (params.approach()) {
        case SatCurveMultiplexerApproach::LET:
            LETTwoPhaseLaw::capillaryPressures(values,
                                               params.template getRealParams<SatCurveMultiplexerApproach::LET>(),
                                               fluidState);
            break;

        case SatCurveMultiplexerApproach::PiecewiseLinear:
            PLTwoPhaseLaw::capillaryPressures(values,
                                              params.template getRealParams<SatCurveMultiplexerApproach::PiecewiseLinear>(),
                                              fluidState);
            break;
        }
    }

    template <class Container, class FluidState>
    static void saturations(Container& values, const Params& params, const FluidState& fluidState)
    {
        switch (params.approach()) {
        case SatCurveMultiplexerApproach::LET:
            LETTwoPhaseLaw::saturations(values,
                                        params.template getRealParams<SatCurveMultiplexerApproach::LET>(),
                                        fluidState);
            break;

        case SatCurveMultiplexerApproach::PiecewiseLinear:
            PLTwoPhaseLaw::saturations(values,
                                       params.template getRealParams<SatCurveMultiplexerApproach::PiecewiseLinear>(),
                                       fluidState);
            break;
        }
    }

    template <class Container, class FluidState>
    static void relativePermeabilities(Container& values, const Params& params, const FluidState& fluidState)
    {
        switch (params.approach()) {
        case SatCurveMultiplexerApproach::LET:
            LETTwoPhaseLaw::relativePermeabilities(values,
                                                   params.template getRealParams<SatCurveMultiplexerApproach::LET>(),
                                                   fluidState);
            break;

        case SatCurveMultiplexerApproach::PiecewiseLinear:
            PLTwoPhaseLaw::relativePermeabilities(values,
                                                  params.template getRealParams<SatCurveMultiplexerApproach::PiecewiseLinear>(),
                                                  fluidState);
            break;
        }
    }

    template <class FluidState, class Evaluation = typename FluidState::ValueType>
    static Evaluation pcnw(const Params& params, const FluidState& fluidState)
    {
        switch (params.approach()) {
        case SatCurveMultiplexerApproach::LET:
            return LETTwoPhaseLaw::pcnw(params.template getRealParams<SatCurveMultiplexerApproach::LET>(),
                                        fluidState);
            break;

        case SatCurveMultiplexerApproach::PiecewiseLinear:
            return PLTwoPhaseLaw::pcnw(params.template getRealParams<SatCurveMultiplexerApproach::PiecewiseLinear>(),
                                       fluidState);
            break;
        }

        return 0.0;
    }

    template <class Evaluation, class ...Args>
    static Evaluation twoPhaseSatPcnw(const Params& params, const Evaluation& Sw)
    {
        if constexpr (FrontIsSatCurveMultiplexerDispatchV<Args...>) {
            return twoPhaseSatPcnwT<Evaluation, Args...>(params, Sw);
        }

        switch (params.approach()) {
        case SatCurveMultiplexerApproach::LET:
            return LETTwoPhaseLaw::twoPhaseSatPcnw(params.template getRealParams<SatCurveMultiplexerApproach::LET>(),
                                                   Sw);
            break;

        case SatCurveMultiplexerApproach::PiecewiseLinear:
            return PLTwoPhaseLaw::twoPhaseSatPcnw(params.template getRealParams<SatCurveMultiplexerApproach::PiecewiseLinear>(),
                                                  Sw);
            break;
        }

        return 0.0;
    }

    template <class Evaluation, class Head, class ...Args>
    static Evaluation twoPhaseSatPcnwT(const Params& params, const Evaluation& Sw)
    {
        if constexpr (Head::approach == SatCurveMultiplexerApproach::LET) {
            return LETTwoPhaseLaw::twoPhaseSatPcnw(params.template getRealParams<SatCurveMultiplexerApproach::LET>(),
                                                   Sw);
        } else if constexpr (Head::approach == SatCurveMultiplexerApproach::PiecewiseLinear) {
            return PLTwoPhaseLaw::twoPhaseSatPcnw(params.template getRealParams<SatCurveMultiplexerApproach::PiecewiseLinear>(),
                                                  Sw);
        } else {
            STATIC_ASSERT_SATCURVE_MULTIPLEXER_UNLESS_GCC_LT_13;
        }
    }

    template <class Evaluation>
    static Evaluation twoPhaseSatPcnwInv(const Params&, const Evaluation&)
    {
        throw std::logic_error("SatCurveMultiplexer::twoPhaseSatPcnwInv"
                               " not implemented!");
    }

    template <class FluidState, class Evaluation = typename FluidState::ValueType>
    static Evaluation Sw(const Params& params, const FluidState& fluidstate)
    {
        switch (params.approach()) {
        case SatCurveMultiplexerApproach::LET:
            return LETTwoPhaseLaw::Sw(params.template getRealParams<SatCurveMultiplexerApproach::LET>(),
                                      fluidstate);
            break;

        case SatCurveMultiplexerApproach::PiecewiseLinear:
            return PLTwoPhaseLaw::Sw(params.template getRealParams<SatCurveMultiplexerApproach::PiecewiseLinear>(),
                                     fluidstate);
            break;
        }

        return 0.0;
    }

    template <class Evaluation>
    static Evaluation twoPhaseSatSw(const Params&, const Evaluation&)
    {
        throw std::logic_error("SatCurveMultiplexer::twoPhaseSatSw"
                               " not implemented!");
    }

    template <class FluidState, class Evaluation = typename FluidState::ValueType>
    static Evaluation Sn(const Params& params, const FluidState& fluidstate)
    {
        switch (params.approach()) {
        case SatCurveMultiplexerApproach::LET:
            return LETTwoPhaseLaw::Sn(params.template getRealParams<SatCurveMultiplexerApproach::LET>(),
                                      fluidstate);
            break;

        case SatCurveMultiplexerApproach::PiecewiseLinear:
            return PLTwoPhaseLaw::Sn(params.template getRealParams<SatCurveMultiplexerApproach::PiecewiseLinear>(),
                                     fluidstate);
            break;
        }

        return 0.0;
    }

    template <class Evaluation>
    static Evaluation twoPhaseSatSn(const Params& params, const Evaluation& pc)
    {
        switch (params.approach()) {
        case SatCurveMultiplexerApproach::LET:
            return LETTwoPhaseLaw::twoPhaseSatSn(params.template getRealParams<SatCurveMultiplexerApproach::LET>(),
                                                 pc);
            break;

        case SatCurveMultiplexerApproach::PiecewiseLinear:
            return PLTwoPhaseLaw::twoPhaseSatSn(params.template getRealParams<SatCurveMultiplexerApproach::PiecewiseLinear>(),
                                                pc);
            break;
        }

        return 0.0;
    }

    template <class FluidState, class Evaluation = typename FluidState::ValueType>
    static Evaluation krw(const Params& params, const FluidState& fluidstate)
    {
        switch (params.approach()) {
        case SatCurveMultiplexerApproach::LET:
            return LETTwoPhaseLaw::krw(params.template getRealParams<SatCurveMultiplexerApproach::LET>(),
                                       fluidstate);
            break;

        case SatCurveMultiplexerApproach::PiecewiseLinear:
            return PLTwoPhaseLaw::krw(params.template getRealParams<SatCurveMultiplexerApproach::PiecewiseLinear>(),
                                      fluidstate);
            break;
        }

        return 0.0;
    }

    template <class Evaluation, class ...Args>
    static Evaluation twoPhaseSatKrw(const Params& params, const Evaluation& Sw)
    {
        if constexpr (FrontIsSatCurveMultiplexerDispatchV<Args...>) {
            return twoPhaseSatKrwT<Evaluation, Args...>(params, Sw);
        }

        switch (params.approach()) {
        case SatCurveMultiplexerApproach::LET:
            return LETTwoPhaseLaw::twoPhaseSatKrw(params.template getRealParams<SatCurveMultiplexerApproach::LET>(),
                                                  Sw);
            break;

        case SatCurveMultiplexerApproach::PiecewiseLinear:
            return PLTwoPhaseLaw::twoPhaseSatKrw(params.template getRealParams<SatCurveMultiplexerApproach::PiecewiseLinear>(),
                                                 Sw);
            break;
        }

        return 0.0;
    }

    template <class Evaluation, class Head, class ...Args>
    static Evaluation twoPhaseSatKrwT(const Params& params, const Evaluation& Sw)
    {
        if constexpr (Head::approach == SatCurveMultiplexerApproach::LET) {
            return LETTwoPhaseLaw::twoPhaseSatKrw(params.template getRealParams<SatCurveMultiplexerApproach::LET>(),
                                                  Sw);
        } else if constexpr (Head::approach == SatCurveMultiplexerApproach::PiecewiseLinear) {
            return PLTwoPhaseLaw::twoPhaseSatKrw(params.template getRealParams<SatCurveMultiplexerApproach::PiecewiseLinear>(),
                                                 Sw);
        } else {
            STATIC_ASSERT_SATCURVE_MULTIPLEXER_UNLESS_GCC_LT_13;
        }
    }

    template <class Evaluation>
    static Evaluation twoPhaseSatKrwInv(const Params& params, const Evaluation& krw)
    {
        switch (params.approach()) {
        case SatCurveMultiplexerApproach::LET:
            return LETTwoPhaseLaw::twoPhaseSatKrwInv(params.template getRealParams<SatCurveMultiplexerApproach::LET>(),
                                                     krw);
            break;

        case SatCurveMultiplexerApproach::PiecewiseLinear:
            return PLTwoPhaseLaw::twoPhaseSatKrwInv(params.template getRealParams<SatCurveMultiplexerApproach::PiecewiseLinear>(),
                                                    krw);
            break;
        }

        return 0.0;
    }

    template <class FluidState, class Evaluation = typename FluidState::ValueType>
    static Evaluation krn(const Params& params, const FluidState& fluidstate)
    {
        switch (params.approach()) {
        case SatCurveMultiplexerApproach::LET:
            return LETTwoPhaseLaw::krn(params.template getRealParams<SatCurveMultiplexerApproach::LET>(),
                                       fluidstate);
            break;

        case SatCurveMultiplexerApproach::PiecewiseLinear:
            return PLTwoPhaseLaw::krn(params.template getRealParams<SatCurveMultiplexerApproach::PiecewiseLinear>(),
                                      fluidstate);
            break;
        }

        return 0.0;
    }

    template <class Evaluation, class ...Args>
    static Evaluation twoPhaseSatKrn(const Params& params, const Evaluation& Sw)
    {
        if constexpr (FrontIsSatCurveMultiplexerDispatchV<Args...>) {
            return twoPhaseSatKrnT<Evaluation, Args...>(params, Sw);
        }

        switch (params.approach()) {
        case SatCurveMultiplexerApproach::LET:
            return LETTwoPhaseLaw::twoPhaseSatKrn(params.template getRealParams<SatCurveMultiplexerApproach::LET>(),
                                                  Sw);
            break;

        case SatCurveMultiplexerApproach::PiecewiseLinear:
            return PLTwoPhaseLaw::twoPhaseSatKrn(params.template getRealParams<SatCurveMultiplexerApproach::PiecewiseLinear>(),
                                                 Sw);
            break;
        }

        return 0.0;
    }

    template <class Evaluation, class Head, class ...Args>
    static Evaluation twoPhaseSatKrnT(const Params& params, const Evaluation& Sw)
    {
        if constexpr (Head::approach == SatCurveMultiplexerApproach::LET) {
            return LETTwoPhaseLaw::twoPhaseSatKrn(params.template getRealParams<SatCurveMultiplexerApproach::LET>(),
                                                  Sw);
        } else if constexpr (Head::approach == SatCurveMultiplexerApproach::PiecewiseLinear) {
            return PLTwoPhaseLaw::twoPhaseSatKrn(params.template getRealParams<SatCurveMultiplexerApproach::PiecewiseLinear>(),
                                                 Sw);
        } else {
            STATIC_ASSERT_SATCURVE_MULTIPLEXER_UNLESS_GCC_LT_13;
        }
    }

    template <class Evaluation>
    static Evaluation twoPhaseSatKrnInv(const Params& params, const Evaluation& krn)
    {
        switch (params.approach()) {
        case SatCurveMultiplexerApproach::LET:
            return LETTwoPhaseLaw::twoPhaseSatKrnInv(params.template getRealParams<SatCurveMultiplexerApproach::LET>(),
                                                     krn);
            break;

        case SatCurveMultiplexerApproach::PiecewiseLinear:
            return PLTwoPhaseLaw::twoPhaseSatKrnInv(params.template getRealParams<SatCurveMultiplexerApproach::PiecewiseLinear>(),
                                                    krn);
            break;
        }

        return 0.0;
    }
};

} // namespace Opm

#endif // OPM_SAT_CURVE_MULTIPLEXER_HPP