A fluid system which uses the black-oil model assumptions to calculate termodynamically meaningful quantities. More...

#include <BlackOilFluidSystem_macrotemplate.hpp>

Inheritance diagram for Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >:

Public Types
using	GasPvt = std::conditional_t< std::is_same_v< Storage< Scalar >, VectorWithDefaultAllocator< Scalar > >, GasPvtMultiplexer< Scalar >, Co2GasPvt< Scalar, Storage > >

using	OilPvt = std::conditional_t< std::is_same_v< Storage< Scalar >, VectorWithDefaultAllocator< Scalar > >, OilPvtMultiplexer< Scalar >, NullOilPvt< Scalar > >

using	WaterPvt = std::conditional_t< std::is_same_v< Storage< Scalar >, VectorWithDefaultAllocator< Scalar > >, WaterPvtMultiplexer< Scalar >, BrineCo2Pvt< Scalar, Storage > >

using	IndexTraitsType = IndexTraits

template<class EvaluationT >
using	ParameterCache = typename FLUIDSYSTEM_CLASSNAME_STATIC< Scalar, IndexTraits, Storage >::template ParameterCache< EvaluationT >

Public Types inherited from Opm::BaseFluidSystem< Scalar, FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage > >
typedef Scalar	Scalar
	The type used for scalar quantities.

Public Member Functions
template<template< typename > typename StorageT>
	FLUIDSYSTEM_CLASSNAME (const FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, StorageT > &other)
	Default copy constructor. More...

	FLUIDSYSTEM_CLASSNAME (Scalar _surfacePressure_, Scalar _surfaceTemperature_, Scalar _reservoirTemperature_, const GasPvt &_gasPvt_, const OilPvt &_oilPvt_, const WaterPvt &_waterPvt_, bool _enableDissolvedGas_, bool _enableDissolvedGasInWater_, bool _enableVaporizedOil_, bool _enableVaporizedWater_, bool _enableConstantRs_, bool _enableDiffusion_, Storage< std::array< Scalar, 3 >> &&_referenceDensity_, Storage< std::array< Scalar, 3 >> &&_molarMass_, Storage< std::array< Scalar, 3 *3 >> &&_diffusionCoefficients_, const PhaseUsageInfo< IndexTraits > &_phaseUsageInfo_, bool _isInitialized_, bool _useSaturatedTables_, bool _enthalpy_eq_energy_)

STATIC_OR_NOTHING void	initFromState (const EclipseState &eclState, const Schedule &schedule)
	Initialize the fluid system using an ECL deck object.

STATIC_OR_NOTHING void	initBegin (std::size_t numPvtRegions)
	Begin the initialization of the black oil fluid system. More...

STATIC_OR_DEVICE void	setEnableDissolvedGas (bool yesno)
	Specify whether the fluid system should consider that the gas component can dissolve in the oil phase. More...

STATIC_OR_DEVICE void	setEnableVaporizedOil (bool yesno)
	Specify whether the fluid system should consider that the oil component can dissolve in the gas phase. More...

STATIC_OR_DEVICE void	setEnableVaporizedWater (bool yesno)
	Specify whether the fluid system should consider that the water component can dissolve in the gas phase. More...

STATIC_OR_DEVICE void	setEnableDissolvedGasInWater (bool yesno)
	Specify whether the fluid system should consider that the gas component can dissolve in the water phase. More...

STATIC_OR_DEVICE void	setEnableConstantRs (bool yesno)
	Specify whether the fluid system should use constant Rs tables. More...

STATIC_OR_DEVICE void	setEnableDiffusion (bool yesno)
	Specify whether the fluid system should consider diffusion. More...

STATIC_OR_DEVICE void	setUseSaturatedTables (bool yesno)
	Specify whether the saturated tables should be used. More...

STATIC_OR_DEVICE void	setGasPvt (std::shared_ptr< GasPvt > pvtObj)
	Set the pressure-volume-saturation (PVT) relations for the gas phase.

STATIC_OR_DEVICE void	setOilPvt (std::shared_ptr< OilPvt > pvtObj)
	Set the pressure-volume-saturation (PVT) relations for the oil phase.

STATIC_OR_DEVICE void	setWaterPvt (std::shared_ptr< WaterPvt > pvtObj)
	Set the pressure-volume-saturation (PVT) relations for the water phase.

STATIC_OR_DEVICE void	setVapPars (const Scalar par1, const Scalar par2)

STATIC_OR_DEVICE void	setReferenceDensities (Scalar rhoOil, Scalar rhoWater, Scalar rhoGas, unsigned regionIdx)
	Initialize the values of the reference densities. More...

STATIC_OR_DEVICE void	initEnd ()
	Finish initializing the black oil fluid system.

STATIC_OR_DEVICE bool	isInitialized () NOTHING_OR_CONST

STATIC_OR_NOTHING std::string_view	phaseName (unsigned phaseIdx) NOTHING_OR_CONST
	Return the human readable name of a fluid phase. More...

STATIC_OR_DEVICE bool	isLiquid (unsigned phaseIdx) NOTHING_OR_CONST
	Return whether a phase is liquid. More...

STATIC_OR_DEVICE const PhaseUsageInfo< IndexTraits > &	phaseUsage () NOTHING_OR_CONST
	Returns a const reference to PhaseUsageInfo.

STATIC_OR_DEVICE unsigned	numActivePhases () NOTHING_OR_CONST
	Returns the number of active fluid phases (i.e., usually three)

STATIC_OR_DEVICE bool	phaseIsActive (unsigned phaseIdx) NOTHING_OR_CONST
	Returns whether a fluid phase is active.

STATIC_OR_DEVICE unsigned	solventComponentIndex (unsigned phaseIdx) NOTHING_OR_CONST
	returns the index of "primary" component of a phase (solvent)

STATIC_OR_DEVICE unsigned	soluteComponentIndex (unsigned phaseIdx) NOTHING_OR_CONST
	returns the index of "secondary" component of a phase (solute)

STATIC_OR_NOTHING std::string_view	componentName (unsigned compIdx) NOTHING_OR_CONST
	Return the human readable name of a component. More...

STATIC_OR_DEVICE Scalar	molarMass (unsigned compIdx, unsigned regionIdx=0) NOTHING_OR_CONST
	Return the molar mass of a component in [kg/mol]. More...

STATIC_OR_DEVICE bool	isIdealMixture (unsigned)
	Returns true if and only if a fluid phase is assumed to be an ideal mixture. More...

STATIC_OR_DEVICE bool	isCompressible (unsigned) NOTHING_OR_CONST
	Returns true if and only if a fluid phase is assumed to be compressible. More...

STATIC_OR_DEVICE bool	isIdealGas (unsigned) NOTHING_OR_CONST
	Returns true if and only if a fluid phase is assumed to be an ideal gas. More...

STATIC_OR_DEVICE std::size_t	numRegions () NOTHING_OR_CONST
	Returns the number of PVT regions which are considered. More...

STATIC_OR_DEVICE bool	enableDissolvedGas () NOTHING_OR_CONST
	Returns whether the fluid system should consider that the gas component can dissolve in the oil phase. More...

STATIC_OR_DEVICE bool	enableDissolvedGasInWater () NOTHING_OR_CONST
	Returns whether the fluid system should consider that the gas component can dissolve in the water phase. More...

STATIC_OR_DEVICE bool	enableVaporizedOil () NOTHING_OR_CONST
	Returns whether the fluid system should consider that the oil component can dissolve in the gas phase. More...

STATIC_OR_DEVICE bool	enableVaporizedWater () NOTHING_OR_CONST
	Returns whether the fluid system should consider that the water component can dissolve in the gas phase. More...

STATIC_OR_DEVICE bool	enableConstantRs () NOTHING_OR_CONST
	Returns whether constant Rs tables should be used.

STATIC_OR_DEVICE bool	enableDiffusion () NOTHING_OR_CONST
	Returns whether the fluid system should consider diffusion. More...

STATIC_OR_DEVICE bool	useSaturatedTables () NOTHING_OR_CONST
	Returns whether the saturated tables should be used. More...

STATIC_OR_DEVICE Scalar	referenceDensity (unsigned phaseIdx, unsigned regionIdx) NOTHING_OR_CONST
	Returns the density of a fluid phase at surface pressure [kg/m^3]. More...

template<class FluidState , class LhsEval = typename FluidState::ValueType, class ParamCacheEval = LhsEval>
STATIC_OR_DEVICE LhsEval	density (const FluidState &fluidState, const ParameterCache< ParamCacheEval > &paramCache, unsigned phaseIdx) NOTHING_OR_CONST
	Calculate the density [kg/m^3] of a fluid phase. More...

template<class FluidState , class LhsEval = typename FluidState::ValueType, class ParamCacheEval = LhsEval>
STATIC_OR_DEVICE LhsEval	fugacityCoefficient (const FluidState &fluidState, const ParameterCache< ParamCacheEval > &paramCache, unsigned phaseIdx, unsigned compIdx) NOTHING_OR_CONST
	Calculate the fugacity coefficient [Pa] of an individual component in a fluid phase. More...

template<class FluidState , class LhsEval = typename FluidState::ValueType, class ParamCacheEval = LhsEval>
STATIC_OR_DEVICE LhsEval	viscosity (const FluidState &fluidState, const ParameterCache< ParamCacheEval > &paramCache, unsigned phaseIdx) NOTHING_OR_CONST
	Calculate the dynamic viscosity of a fluid phase [Pa*s]. More...

template<class FluidState , class LhsEval = typename FluidState::ValueType, class ParamCacheEval = LhsEval>
STATIC_OR_DEVICE LhsEval	enthalpy (const FluidState &fluidState, const ParameterCache< ParamCacheEval > &paramCache, unsigned phaseIdx)
	Given a phase's composition, temperature, pressure and density, calculate its specific enthalpy [J/kg]. More...

template<class FluidState , class LhsEval = typename FluidState::ValueType, class ParamCacheEval = LhsEval>
STATIC_OR_DEVICE LhsEval	internalEnergy (const FluidState &fluidState, const ParameterCache< ParamCacheEval > &paramCache, unsigned phaseIdx) NOTHING_OR_CONST

template<class FluidState , class LhsEval = typename FluidState::ValueType>
STATIC_OR_DEVICE LhsEval	density (const FluidState &fluidState, unsigned phaseIdx, unsigned regionIdx) NOTHING_OR_CONST
	Calculate the density [kg/m^3] of a fluid phase. More...

template<class FluidState , class LhsEval = typename FluidState::ValueType>
STATIC_OR_DEVICE LhsEval	saturatedDensity (const FluidState &fluidState, unsigned phaseIdx, unsigned regionIdx) NOTHING_OR_CONST
	Compute the density of a saturated fluid phase. More...

template<class FluidState , class LhsEval = typename FluidState::ValueType>
STATIC_OR_DEVICE LhsEval	inverseFormationVolumeFactor (const FluidState &fluidState, unsigned phaseIdx, unsigned regionIdx) NOTHING_OR_CONST
	Returns the formation volume factor $B_\alpha$ of an "undersaturated" fluid phase. More...

template<class FluidState , class LhsEval = typename FluidState::ValueType>
STATIC_OR_DEVICE std::pair< LhsEval, LhsEval >	inverseFormationVolumeFactorAndViscosity (const FluidState &fluidState, unsigned phaseIdx, unsigned regionIdx)

template<class FluidState , class LhsEval = typename FluidState::ValueType>
STATIC_OR_DEVICE LhsEval	saturatedInverseFormationVolumeFactor (const FluidState &fluidState, unsigned phaseIdx, unsigned regionIdx) NOTHING_OR_CONST
	Returns the formation volume factor $B_\alpha$ of a "saturated" fluid phase. More...

template<class FluidState , class LhsEval = typename FluidState::ValueType>
STATIC_OR_DEVICE LhsEval	fugacityCoefficient (const FluidState &fluidState, unsigned phaseIdx, unsigned compIdx, unsigned regionIdx) NOTHING_OR_CONST
	Calculate the fugacity coefficient [Pa] of an individual component in a fluid phase. More...

template<class FluidState , class LhsEval = typename FluidState::ValueType>
STATIC_OR_DEVICE LhsEval	viscosity (const FluidState &fluidState, unsigned phaseIdx, unsigned regionIdx) NOTHING_OR_CONST
	Calculate the dynamic viscosity of a fluid phase [Pa*s]. More...

template<class FluidState , class LhsEval = typename FluidState::ValueType>
STATIC_OR_DEVICE LhsEval	internalEnergy (const FluidState &fluidState, const unsigned phaseIdx, const unsigned regionIdx) NOTHING_OR_CONST

template<class FluidState , class LhsEval = typename FluidState::ValueType>
STATIC_OR_DEVICE LhsEval	internalMixingTotalEnergy (const FluidState &fluidState, unsigned phaseIdx, unsigned regionIdx) NOTHING_OR_CONST

template<class FluidState , class LhsEval = typename FluidState::ValueType>
STATIC_OR_DEVICE LhsEval	enthalpy (const FluidState &fluidState, unsigned phaseIdx, unsigned regionIdx) NOTHING_OR_CONST
	Given a phase's composition, temperature, pressure and density, calculate its specific enthalpy [J/kg]. More...

template<class FluidState , class LhsEval = typename FluidState::ValueType>
STATIC_OR_DEVICE LhsEval	saturatedVaporizationFactor (const FluidState &fluidState, unsigned phaseIdx, unsigned regionIdx) NOTHING_OR_CONST
	Returns the water vaporization factor $R_\alpha$ of saturated phase. More...

template<class FluidState , class LhsEval = typename FluidState::ValueType>
STATIC_OR_DEVICE LhsEval	saturatedDissolutionFactor (const FluidState &fluidState, unsigned phaseIdx, unsigned regionIdx, const LhsEval &maxOilSaturation) NOTHING_OR_CONST
	Returns the dissolution factor $R_\alpha$ of a saturated fluid phase. More...

template<class FluidState , class LhsEval = typename FluidState::ValueType>
STATIC_OR_DEVICE LhsEval	saturatedDissolutionFactor (const FluidState &fluidState, unsigned phaseIdx, unsigned regionIdx) NOTHING_OR_CONST
	Returns the dissolution factor $R_\alpha$ of a saturated fluid phase. More...

template<class FluidState , class LhsEval = typename FluidState::ValueType>
STATIC_OR_DEVICE LhsEval	bubblePointPressure (const FluidState &fluidState, unsigned regionIdx) NOTHING_OR_CONST
	Returns the bubble point pressure $P_b$ using the current Rs.

template<class FluidState , class LhsEval = typename FluidState::ValueType>
STATIC_OR_DEVICE LhsEval	dewPointPressure (const FluidState &fluidState, unsigned regionIdx) NOTHING_OR_CONST
	Returns the dew point pressure $P_d$ using the current Rv.

template<class FluidState , class LhsEval = typename FluidState::ValueType>
STATIC_OR_DEVICE LhsEval	saturationPressure (const FluidState &fluidState, unsigned phaseIdx, unsigned regionIdx) NOTHING_OR_CONST
	Returns the saturation pressure of a given phase [Pa] depending on its composition. More...

template<class LhsEval >
STATIC_OR_DEVICE LhsEval	convertXoGToRs (const LhsEval &XoG, unsigned regionIdx) NOTHING_OR_CONST
	Convert the mass fraction of the gas component in the oil phase to the corresponding gas dissolution factor.

template<class LhsEval >
STATIC_OR_DEVICE LhsEval	convertXwGToRsw (const LhsEval &XwG, unsigned regionIdx) NOTHING_OR_CONST
	Convert the mass fraction of the gas component in the water phase to the corresponding gas dissolution factor.

template<class LhsEval >
STATIC_OR_DEVICE LhsEval	convertXgOToRv (const LhsEval &XgO, unsigned regionIdx) NOTHING_OR_CONST
	Convert the mass fraction of the oil component in the gas phase to the corresponding oil vaporization factor.

template<class LhsEval >
STATIC_OR_DEVICE LhsEval	convertXgWToRvw (const LhsEval &XgW, unsigned regionIdx) NOTHING_OR_CONST
	Convert the mass fraction of the water component in the gas phase to the corresponding water vaporization factor.

template<class LhsEval >
STATIC_OR_DEVICE LhsEval	convertRsToXoG (const LhsEval &Rs, unsigned regionIdx) NOTHING_OR_CONST
	Convert a gas dissolution factor to the the corresponding mass fraction of the gas component in the oil phase.

template<class LhsEval >
STATIC_OR_DEVICE LhsEval	convertRswToXwG (const LhsEval &Rsw, unsigned regionIdx) NOTHING_OR_CONST
	Convert a gas dissolution factor to the the corresponding mass fraction of the gas component in the water phase.

template<class LhsEval >
STATIC_OR_DEVICE LhsEval	convertRvToXgO (const LhsEval &Rv, unsigned regionIdx) NOTHING_OR_CONST
	Convert an oil vaporization factor to the corresponding mass fraction of the oil component in the gas phase.

template<class LhsEval >
STATIC_OR_DEVICE LhsEval	convertRvwToXgW (const LhsEval &Rvw, unsigned regionIdx) NOTHING_OR_CONST
	Convert an water vaporization factor to the corresponding mass fraction of the water component in the gas phase.

template<class LhsEval >
STATIC_OR_DEVICE LhsEval	convertXgWToxgW (const LhsEval &XgW, unsigned regionIdx) NOTHING_OR_CONST
	Convert a water mass fraction in the gas phase the corresponding mole fraction.

template<class LhsEval >
STATIC_OR_DEVICE LhsEval	convertXwGToxwG (const LhsEval &XwG, unsigned regionIdx) NOTHING_OR_CONST
	Convert a gas mass fraction in the water phase the corresponding mole fraction.

template<class LhsEval >
STATIC_OR_DEVICE LhsEval	convertXoGToxoG (const LhsEval &XoG, unsigned regionIdx) NOTHING_OR_CONST
	Convert a gas mass fraction in the oil phase the corresponding mole fraction.

template<class LhsEval >
STATIC_OR_DEVICE LhsEval	convertxoGToXoG (const LhsEval &xoG, unsigned regionIdx) NOTHING_OR_CONST
	Convert a gas mole fraction in the oil phase the corresponding mass fraction.

template<class LhsEval >
STATIC_OR_DEVICE LhsEval	convertXgOToxgO (const LhsEval &XgO, unsigned regionIdx) NOTHING_OR_CONST
	Convert a oil mass fraction in the gas phase the corresponding mole fraction.

template<class LhsEval >
STATIC_OR_DEVICE LhsEval	convertxgOToXgO (const LhsEval &xgO, unsigned regionIdx) NOTHING_OR_CONST
	Convert a oil mole fraction in the gas phase the corresponding mass fraction.

STATIC_OR_DEVICE const GasPvt &	gasPvt () NOTHING_OR_CONST
	Return a reference to the low-level object which calculates the gas phase quantities. More...

STATIC_OR_DEVICE const OilPvt &	oilPvt () NOTHING_OR_CONST
	Return a reference to the low-level object which calculates the oil phase quantities. More...

STATIC_OR_DEVICE const WaterPvt &	waterPvt () NOTHING_OR_CONST
	Return a reference to the low-level object which calculates the water phase quantities. More...

STATIC_OR_DEVICE Scalar	reservoirTemperature (unsigned=0) NOTHING_OR_CONST
	Set the temperature of the reservoir. More...

STATIC_OR_DEVICE void	setReservoirTemperature (Scalar value) NOTHING_OR_CONST
	Return the temperature of the reservoir. More...

STATIC_OR_DEVICE short	activeToCanonicalPhaseIdx (unsigned activePhaseIdx) NOTHING_OR_CONST

STATIC_OR_DEVICE short	canonicalToActivePhaseIdx (unsigned phaseIdx) NOTHING_OR_CONST

STATIC_OR_DEVICE short	activeToCanonicalCompIdx (unsigned activeCompIdx) NOTHING_OR_CONST

STATIC_OR_DEVICE short	canonicalToActiveCompIdx (unsigned compIdx) NOTHING_OR_CONST

STATIC_OR_DEVICE short	activePhaseToActiveCompIdx (unsigned activePhaseIdx) NOTHING_OR_CONST

STATIC_OR_DEVICE short	activeCompToActivePhaseIdx (unsigned activeCompIdx) NOTHING_OR_CONST

STATIC_OR_DEVICE Scalar	diffusionCoefficient (unsigned compIdx, unsigned phaseIdx, unsigned regionIdx=0) NOTHING_OR_CONST
	Calculate the binary molecular diffusion coefficient for a component in a fluid phase [mol^2 * s / (kg*m^3)]. More...

STATIC_OR_DEVICE void	setDiffusionCoefficient (Scalar coefficient, unsigned compIdx, unsigned phaseIdx, unsigned regionIdx=0) NOTHING_OR_CONST

template<class FluidState , class LhsEval = typename FluidState::ValueType, class ParamCacheEval = LhsEval>
STATIC_OR_DEVICE LhsEval	diffusionCoefficient (const FluidState &fluidState, const ParameterCache< ParamCacheEval > &paramCache, unsigned phaseIdx, unsigned compIdx) NOTHING_OR_CONST
	Calculate the binary molecular diffusion coefficient for a component in a fluid phase [mol^2 * s / (kg*m^3)]. More...

STATIC_OR_DEVICE void	setEnergyEqualEnthalpy (bool enthalpy_eq_energy)

STATIC_OR_DEVICE bool	enthalpyEqualEnergy () NOTHING_OR_CONST

Public Attributes
STATIC_OR_NOTHING Scalar	surfacePressure
	The pressure at the surface.

STATIC_OR_NOTHING Scalar	surfaceTemperature
	The temperature at the surface.

Static Public Attributes
static constexpr unsigned	numPhases = IndexTraits::numPhases
	Number of fluid phases in the fluid system. More...

static constexpr unsigned	waterPhaseIdx = IndexTraits::waterPhaseIdx
	Index of the water phase.

static constexpr unsigned	oilPhaseIdx = IndexTraits::oilPhaseIdx
	Index of the oil phase.

static constexpr unsigned	gasPhaseIdx = IndexTraits::gasPhaseIdx
	Index of the gas phase.

static constexpr unsigned	numComponents = IndexTraits::numComponents
	Number of chemical species in the fluid system. More...

static constexpr int	oilCompIdx = IndexTraits::oilCompIdx
	Index of the oil component.

static constexpr int	waterCompIdx = IndexTraits::waterCompIdx
	Index of the water component.

static constexpr int	gasCompIdx = IndexTraits::gasCompIdx
	Index of the gas component.

Static Public Attributes inherited from Opm::BaseFluidSystem< Scalar, FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage > >
static const int	numComponents
	Number of chemical species in the fluid system.

static const int	numPhases
	Number of fluid phases in the fluid system.

Friends
template<class ScalarT , class IndexTraitsT , template< typename > typename StorageT>
class	FLUIDSYSTEM_CLASSNAME_STATIC

Additional Inherited Members
Static Public Member Functions inherited from Opm::BaseFluidSystem< Scalar, FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage > >
static std::string_view	phaseName (unsigned)
	Return the human readable name of a fluid phase. More...

static bool	isLiquid (unsigned)
	Return whether a phase is liquid. More...

static bool	isIdealMixture (unsigned)
	Returns true if and only if a fluid phase is assumed to be an ideal mixture. More...

static bool	isCompressible (unsigned)
	Returns true if and only if a fluid phase is assumed to be compressible. More...

static bool	isIdealGas (unsigned)
	Returns true if and only if a fluid phase is assumed to be an ideal gas. More...

static std::string_view	componentName (unsigned)
	Return the human readable name of a component. More...

static Scalar	molarMass (unsigned)
	Return the molar mass of a component in [kg/mol]. More...

static Scalar	acentricFactor (unsigned)
	Return the acetntric factor of a component. More...

static void	init ()
	Initialize the fluid system's static parameters.

static LhsEval	density (const FluidState &, const ParamCache &, unsigned)
	Calculate the density [kg/m^3] of a fluid phase. More...

static LhsEval	fugacityCoefficient (const FluidState &, ParamCache &, unsigned, unsigned)
	Calculate the fugacity coefficient [Pa] of an individual component in a fluid phase. More...

static LhsEval	viscosity (const FluidState &, ParamCache &, unsigned)
	Calculate the dynamic viscosity of a fluid phase [Pa*s]. More...

static LhsEval	diffusionCoefficient (const FluidState &, ParamCache &, unsigned, unsigned)
	Calculate the binary molecular diffusion coefficient for a component in a fluid phase [mol^2 * s / (kg*m^3)]. More...

static LhsEval	enthalpy (const FluidState &, ParamCache &, unsigned)
	Given a phase's composition, temperature, pressure and density, calculate its specific enthalpy [J/kg]. More...

static LhsEval	thermalConductivity (const FluidState &, ParamCache &, unsigned)
	Thermal conductivity of a fluid phase [W/(m K)]. More...

static LhsEval	heatCapacity (const FluidState &, ParamCache &, unsigned)
	Specific isobaric heat capacity of a fluid phase [J/kg]. More...

static bool	phaseIsActive (unsigned)
	Returns whether a fluid phase is active.

Detailed Description

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>
class Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >

A fluid system which uses the black-oil model assumptions to calculate termodynamically meaningful quantities.

Template Parameters

Scalar The type used for scalar floating point values

Constructor & Destructor Documentation

◆ FLUIDSYSTEM_CLASSNAME()

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

template<template< typename > typename StorageT>

Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::FLUIDSYSTEM_CLASSNAME ( const FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, StorageT > & other )

inlineexplicit

Default copy constructor.

This can be used to copy from one storage type (say std::vector) to another (say GPUBuffer).

Member Function Documentation

◆ componentName()

template<class Scalar , class IndexTraits , template< typename > typename Storage>

std::string_view Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::componentName ( unsigned compIdx )

Return the human readable name of a component.

◆ density() [1/2]

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

template<class FluidState , class LhsEval = typename FluidState::ValueType, class ParamCacheEval = LhsEval>

STATIC_OR_DEVICE LhsEval Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::density	(	const FluidState &	fluidState,
		const ParameterCache< ParamCacheEval > &	paramCache,
		unsigned	phaseIdx
	)

inline

Calculate the density [kg/m^3] of a fluid phase.

◆ density() [2/2]

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

template<class FluidState , class LhsEval = typename FluidState::ValueType>

STATIC_OR_DEVICE LhsEval Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::density	(	const FluidState &	fluidState,
		unsigned	phaseIdx,
		unsigned	regionIdx
	)

inline

Calculate the density [kg/m^3] of a fluid phase.

◆ diffusionCoefficient() [1/2]

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

STATIC_OR_DEVICE Scalar Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::diffusionCoefficient	(	unsigned	compIdx,
		unsigned	phaseIdx,
		unsigned	regionIdx = `0`
	)

inline

Calculate the binary molecular diffusion coefficient for a component in a fluid phase [mol^2 * s / (kg*m^3)].

Molecular diffusion of a compoent $\kappa$ is caused by a gradient of the mole fraction and follows the law

$J = - D \mathbf{grad} x^\kappa_\alpha$

where $x_\alpha^\kappa$ is the component's mole fraction in phase $\alpha$ , $D$ is the diffusion coefficient and $J$ is the diffusive flux.

◆ diffusionCoefficient() [2/2]

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

template<class FluidState , class LhsEval = typename FluidState::ValueType, class ParamCacheEval = LhsEval>

STATIC_OR_DEVICE LhsEval Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::diffusionCoefficient	(	const FluidState &	fluidState,
		const ParameterCache< ParamCacheEval > &	paramCache,
		unsigned	phaseIdx,
		unsigned	compIdx
	)

inline

Calculate the binary molecular diffusion coefficient for a component in a fluid phase [mol^2 * s / (kg*m^3)].

Molecular diffusion of a compoent $\kappa$ is caused by a gradient of the mole fraction and follows the law

$J = - D \mathbf{grad} x^\kappa_\alpha$

where $x_\alpha^\kappa$ is the component's mole fraction in phase $\alpha$ , $D$ is the diffusion coefficient and $J$ is the diffusive flux.

◆ enableDiffusion()

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

STATIC_OR_DEVICE bool Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::enableDiffusion ( )

inline

Returns whether the fluid system should consider diffusion.

By default, diffusion is not considered.

◆ enableDissolvedGas()

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

STATIC_OR_DEVICE bool Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::enableDissolvedGas ( )

inline

Returns whether the fluid system should consider that the gas component can dissolve in the oil phase.

By default, dissolved gas is considered.

◆ enableDissolvedGasInWater()

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

STATIC_OR_DEVICE bool Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::enableDissolvedGasInWater ( )

inline

Returns whether the fluid system should consider that the gas component can dissolve in the water phase.

By default, dissolved gas is considered.

◆ enableVaporizedOil()

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

STATIC_OR_DEVICE bool Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::enableVaporizedOil ( )

inline

Returns whether the fluid system should consider that the oil component can dissolve in the gas phase.

By default, vaporized oil is not considered.

◆ enableVaporizedWater()

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

STATIC_OR_DEVICE bool Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::enableVaporizedWater ( )

inline

Returns whether the fluid system should consider that the water component can dissolve in the gas phase.

By default, vaporized water is not considered.

◆ enthalpy() [1/2]

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

template<class FluidState , class LhsEval = typename FluidState::ValueType, class ParamCacheEval = LhsEval>

STATIC_OR_DEVICE LhsEval Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::enthalpy	(	const FluidState &	fluidState,
		const ParameterCache< ParamCacheEval > &	paramCache,
		unsigned	phaseIdx
	)

inline

Given a phase's composition, temperature, pressure and density, calculate its specific enthalpy [J/kg].

◆ enthalpy() [2/2]

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

template<class FluidState , class LhsEval = typename FluidState::ValueType>

STATIC_OR_DEVICE LhsEval Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::enthalpy	(	const FluidState &	fluidState,
		unsigned	phaseIdx,
		unsigned	regionIdx
	)

inline

Given a phase's composition, temperature, pressure and density, calculate its specific enthalpy [J/kg].

◆ fugacityCoefficient() [1/2]

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

template<class FluidState , class LhsEval = typename FluidState::ValueType, class ParamCacheEval = LhsEval>

STATIC_OR_DEVICE LhsEval Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::fugacityCoefficient	(	const FluidState &	fluidState,
		const ParameterCache< ParamCacheEval > &	paramCache,
		unsigned	phaseIdx,
		unsigned	compIdx
	)

inline

Calculate the fugacity coefficient [Pa] of an individual component in a fluid phase.

The fugacity coefficient $\phi_\kappa$ is connected to the fugacity $f_\kappa$ and the component's molarity $x_\kappa$ by means of the relation

$f_\kappa = \phi_\kappa\,x_{\kappa}$

◆ fugacityCoefficient() [2/2]

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

template<class FluidState , class LhsEval = typename FluidState::ValueType>

STATIC_OR_DEVICE LhsEval Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::fugacityCoefficient	(	const FluidState &	fluidState,
		unsigned	phaseIdx,
		unsigned	compIdx,
		unsigned	regionIdx
	)

inline

Calculate the fugacity coefficient [Pa] of an individual component in a fluid phase.

The fugacity coefficient $\phi_\kappa$ is connected to the fugacity $f_\kappa$ and the component's molarity $x_\kappa$ by means of the relation

$f_\kappa = \phi_\kappa\,x_{\kappa}$

◆ gasPvt()

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

STATIC_OR_DEVICE const GasPvt& Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::gasPvt ( )

inline

Return a reference to the low-level object which calculates the gas phase quantities.

Note: It is not recommended to use this method directly, but the black-oil specific methods of the fluid systems from above should be used instead.

◆ initBegin()

template<class Scalar , class IndexTraits , template< typename > typename Storage>

void Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::initBegin ( std::size_t numPvtRegions )

Begin the initialization of the black oil fluid system.

After calling this method the reference densities, all dissolution and formation volume factors, the oil bubble pressure, all viscosities and the water compressibility must be set. Before the fluid system can be used, updateIndexMapping_() must be called to finalize the initialization.

◆ inverseFormationVolumeFactor()

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

template<class FluidState , class LhsEval = typename FluidState::ValueType>

STATIC_OR_DEVICE LhsEval Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::inverseFormationVolumeFactor	(	const FluidState &	fluidState,
		unsigned	phaseIdx,
		unsigned	regionIdx
	)

inline

Returns the formation volume factor $B_\alpha$ of an "undersaturated" fluid phase.

For the oil (gas) phase, "undersaturated" means that the concentration of the gas (oil) component is not assumed to be at the thermodynamically possible maximum at the given temperature and pressure.

◆ isCompressible()

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

STATIC_OR_DEVICE bool Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::isCompressible ( unsigned )

inline

Returns true if and only if a fluid phase is assumed to be compressible.

Compressible means that the partial derivative of the density to the fluid pressure is always larger than zero.

◆ isIdealGas()

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

STATIC_OR_DEVICE bool Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::isIdealGas ( unsigned )

inline

Returns true if and only if a fluid phase is assumed to be an ideal gas.

◆ isIdealMixture()

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

STATIC_OR_DEVICE bool Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::isIdealMixture ( unsigned )

inline

Returns true if and only if a fluid phase is assumed to be an ideal mixture.

We define an ideal mixture as a fluid phase where the fugacity coefficients of all components times the pressure of the phase are independent on the fluid composition. This assumption is true if Henry's law and Rault's law apply. If you are unsure what this function should return, it is safe to return false. The only damage done will be (slightly) increased computation times in some cases.

◆ isLiquid()

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

STATIC_OR_DEVICE bool Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::isLiquid ( unsigned phaseIdx )

inline

Return whether a phase is liquid.

◆ molarMass()

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

STATIC_OR_DEVICE Scalar Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::molarMass	(	unsigned	compIdx,
		unsigned	regionIdx = `0`
	)

inline

Return the molar mass of a component in [kg/mol].

◆ numRegions()

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

STATIC_OR_DEVICE std::size_t Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::numRegions ( )

inline

Returns the number of PVT regions which are considered.

By default, this is 1.

◆ oilPvt()

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

STATIC_OR_DEVICE const OilPvt& Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::oilPvt ( )

inline

Return a reference to the low-level object which calculates the oil phase quantities.

Note: It is not recommended to use this method directly, but the black-oil specific methods of the fluid systems from above should be used instead.

◆ phaseName()

template<class Scalar , class IndexTraits , template< typename > typename Storage>

std::string_view Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::phaseName ( unsigned phaseIdx )

Return the human readable name of a fluid phase.

◆ referenceDensity()

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

STATIC_OR_DEVICE Scalar Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::referenceDensity	(	unsigned	phaseIdx,
		unsigned	regionIdx
	)

inline

Returns the density of a fluid phase at surface pressure [kg/m^3].

◆ reservoirTemperature()

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

STATIC_OR_DEVICE Scalar Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::reservoirTemperature ( unsigned = 0 )

inline

Set the temperature of the reservoir.

This method is black-oil specific and only makes sense for isothermal simulations.

◆ saturatedDensity()

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

template<class FluidState , class LhsEval = typename FluidState::ValueType>

STATIC_OR_DEVICE LhsEval Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::saturatedDensity	(	const FluidState &	fluidState,
		unsigned	phaseIdx,
		unsigned	regionIdx
	)

inline

Compute the density of a saturated fluid phase.

This means the density of the given fluid phase if the dissolved component (gas for the oil phase and oil for the gas phase) is at the thermodynamically possible maximum. For the water phase, there's no difference to the density() method for the standard blackoil model. If enableDissolvedGasInWater is enabled the water density takes into account the amount of dissolved gas

◆ saturatedDissolutionFactor() [1/2]

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

template<class FluidState , class LhsEval = typename FluidState::ValueType>

STATIC_OR_DEVICE LhsEval Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::saturatedDissolutionFactor	(	const FluidState &	fluidState,
		unsigned	phaseIdx,
		unsigned	regionIdx,
		const LhsEval &	maxOilSaturation
	)

inline

Returns the dissolution factor $R_\alpha$ of a saturated fluid phase.

For the oil (gas) phase, this means the R_s and R_v factors, for the water phase, it is always 0.

◆ saturatedDissolutionFactor() [2/2]

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

template<class FluidState , class LhsEval = typename FluidState::ValueType>

STATIC_OR_DEVICE LhsEval Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::saturatedDissolutionFactor	(	const FluidState &	fluidState,
		unsigned	phaseIdx,
		unsigned	regionIdx
	)

inline

Returns the dissolution factor $R_\alpha$ of a saturated fluid phase.

For the oil (gas) phase, this means the R_s and R_v factors, for the water phase, it is always 0. The difference of this method compared to the previous one is that this method does not prevent dissolving a given component if the corresponding phase's saturation is small-

◆ saturatedInverseFormationVolumeFactor()

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

template<class FluidState , class LhsEval = typename FluidState::ValueType>

STATIC_OR_DEVICE LhsEval Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::saturatedInverseFormationVolumeFactor	(	const FluidState &	fluidState,
		unsigned	phaseIdx,
		unsigned	regionIdx
	)

inline

Returns the formation volume factor $B_\alpha$ of a "saturated" fluid phase.

For the oil phase, this means that it is gas saturated, the gas phase is oil saturated and for the water phase, there is no difference to formationVolumeFactor() for the standard blackoil model. If enableDissolvedGasInWater is enabled the water density takes into account the amount of dissolved gas

◆ saturatedVaporizationFactor()

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

template<class FluidState , class LhsEval = typename FluidState::ValueType>

STATIC_OR_DEVICE LhsEval Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::saturatedVaporizationFactor	(	const FluidState &	fluidState,
		unsigned	phaseIdx,
		unsigned	regionIdx
	)

inline

Returns the water vaporization factor $R_\alpha$ of saturated phase.

For the gas phase, this means the R_vw factor, for the water and oil phase, it is always 0.

◆ saturationPressure()

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

template<class FluidState , class LhsEval = typename FluidState::ValueType>

STATIC_OR_DEVICE LhsEval Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::saturationPressure	(	const FluidState &	fluidState,
		unsigned	phaseIdx,
		unsigned	regionIdx
	)

inline

Returns the saturation pressure of a given phase [Pa] depending on its composition.

In the black-oil model, the saturation pressure it the pressure at which the fluid phase is in equilibrium with the gas phase, i.e., it is the inverse of the "dissolution factor". Note that a-priori this quantity is undefined for the water phase (because water is assumed to be immiscible with everything else). This method here just returns 0, though.

◆ setDiffusionCoefficient()

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

STATIC_OR_DEVICE void Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::setDiffusionCoefficient	(	Scalar	coefficient,
		unsigned	compIdx,
		unsigned	phaseIdx,
		unsigned	regionIdx = `0`
	)

inline

◆ setEnableConstantRs()

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

STATIC_OR_DEVICE void Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::setEnableConstantRs ( bool yesno )

inline

Specify whether the fluid system should use constant Rs tables.

This is used when DISGAS is not active and gas phase is inactive, but constant Rs tables are provided.

◆ setEnableDiffusion()

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

STATIC_OR_DEVICE void Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::setEnableDiffusion ( bool yesno )

inline

Specify whether the fluid system should consider diffusion.

By default, diffusion is not considered.

◆ setEnableDissolvedGas()

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

STATIC_OR_DEVICE void Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::setEnableDissolvedGas ( bool yesno )

inline

Specify whether the fluid system should consider that the gas component can dissolve in the oil phase.

By default, dissolved gas is considered.

◆ setEnableDissolvedGasInWater()

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

STATIC_OR_DEVICE void Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::setEnableDissolvedGasInWater ( bool yesno )

inline

Specify whether the fluid system should consider that the gas component can dissolve in the water phase.

By default, dissovled gas in water is not considered.

◆ setEnableVaporizedOil()

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

STATIC_OR_DEVICE void Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::setEnableVaporizedOil ( bool yesno )

inline

Specify whether the fluid system should consider that the oil component can dissolve in the gas phase.

By default, vaporized oil is not considered.

◆ setEnableVaporizedWater()

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

STATIC_OR_DEVICE void Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::setEnableVaporizedWater ( bool yesno )

inline

Specify whether the fluid system should consider that the water component can dissolve in the gas phase.

By default, vaporized water is not considered.

◆ setReferenceDensities()

template<class Scalar , class IndexTraits , template< typename > typename Storage>

NOTHING_OR_DEVICE void Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::setReferenceDensities	(	Scalar	rhoOil,
		Scalar	rhoWater,
		Scalar	rhoGas,
		unsigned	regionIdx
	)

Initialize the values of the reference densities.

Parameters

rhoOil	The reference density of (gas saturated) oil phase.
rhoWater	The reference density of the water phase.
rhoGas	The reference density of the gas phase.
regionIdx	Region index to use.

◆ setReservoirTemperature()

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

STATIC_OR_DEVICE void Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::setReservoirTemperature ( Scalar value )

inline

Return the temperature of the reservoir.

This method is black-oil specific and only makes sense for isothermal simulations.

◆ setUseSaturatedTables()

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

STATIC_OR_DEVICE void Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::setUseSaturatedTables ( bool yesno )

inline

Specify whether the saturated tables should be used.

By default, saturated tables are used

◆ useSaturatedTables()

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

STATIC_OR_DEVICE bool Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::useSaturatedTables ( )

inline

Returns whether the saturated tables should be used.

By default, saturated tables are used. If false the unsaturated tables are extrapolated

◆ viscosity() [1/2]

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

template<class FluidState , class LhsEval = typename FluidState::ValueType, class ParamCacheEval = LhsEval>

STATIC_OR_DEVICE LhsEval Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::viscosity	(	const FluidState &	fluidState,
		const ParameterCache< ParamCacheEval > &	paramCache,
		unsigned	phaseIdx
	)

inline

Calculate the dynamic viscosity of a fluid phase [Pa*s].

◆ viscosity() [2/2]

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

template<class FluidState , class LhsEval = typename FluidState::ValueType>

STATIC_OR_DEVICE LhsEval Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::viscosity	(	const FluidState &	fluidState,
		unsigned	phaseIdx,
		unsigned	regionIdx
	)

inline

Calculate the dynamic viscosity of a fluid phase [Pa*s].

◆ waterPvt()

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

STATIC_OR_DEVICE const WaterPvt& Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::waterPvt ( )

inline

Return a reference to the low-level object which calculates the water phase quantities.

Note: It is not recommended to use this method directly, but the black-oil specific methods of the fluid systems from above should be used instead.

Member Data Documentation

◆ numComponents

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

constexpr unsigned Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::numComponents = IndexTraits::numComponents

static

Number of chemical species in the fluid system.

◆ numPhases

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>

constexpr unsigned Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >::numPhases = IndexTraits::numPhases

static

Number of fluid phases in the fluid system.

The documentation for this class was generated from the following file:

opm/material/fluidsystems/BlackOilFluidSystem_macrotemplate.hpp

Public Types

Public Member Functions

Public Attributes

Static Public Attributes

Friends

Additional Inherited Members

Detailed Description

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator> class Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >

Constructor & Destructor Documentation

◆ FLUIDSYSTEM_CLASSNAME()

Member Function Documentation

◆ componentName()

◆ density() [1/2]

◆ density() [2/2]

◆ diffusionCoefficient() [1/2]

◆ diffusionCoefficient() [2/2]

◆ enableDiffusion()

◆ enableDissolvedGas()

◆ enableDissolvedGasInWater()

◆ enableVaporizedOil()

◆ enableVaporizedWater()

◆ enthalpy() [1/2]

◆ enthalpy() [2/2]

◆ fugacityCoefficient() [1/2]

◆ fugacityCoefficient() [2/2]

◆ gasPvt()

◆ initBegin()

◆ inverseFormationVolumeFactor()

◆ isCompressible()

◆ isIdealGas()

◆ isIdealMixture()

◆ isLiquid()

◆ molarMass()

◆ numRegions()

◆ oilPvt()

◆ phaseName()

◆ referenceDensity()

◆ reservoirTemperature()

◆ saturatedDensity()

◆ saturatedDissolutionFactor() [1/2]

◆ saturatedDissolutionFactor() [2/2]

◆ saturatedInverseFormationVolumeFactor()

◆ saturatedVaporizationFactor()

◆ saturationPressure()

◆ setDiffusionCoefficient()

◆ setEnableConstantRs()

◆ setEnableDiffusion()

◆ setEnableDissolvedGas()

◆ setEnableDissolvedGasInWater()

◆ setEnableVaporizedOil()

◆ setEnableVaporizedWater()

◆ setReferenceDensities()

◆ setReservoirTemperature()

◆ setUseSaturatedTables()

◆ useSaturatedTables()

◆ viscosity() [1/2]

◆ viscosity() [2/2]

◆ waterPvt()

Member Data Documentation

◆ numComponents

◆ numPhases

template<class Scalar, class IndexTraits = BlackOilDefaultFluidSystemIndices, template< typename > typename Storage = VectorWithDefaultAllocator>
class Opm::FLUIDSYSTEM_CLASSNAME< Scalar, IndexTraits, Storage >