blackoilratevector.hh

Go to the documentation of this file.

// -*- mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
// vi: set et ts=4 sw=4 sts=4:
/*
  This file is part of the Open Porous Media project (OPM).

  OPM is free software: you can redistribute it and/or modify
  it under the terms of the GNU General Public License as published by
  the Free Software Foundation, either version 2 of the License, or
  (at your option) any later version.

  OPM is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  GNU General Public License for more details.

  You should have received a copy of the GNU General Public License
  along with OPM.  If not, see <http://www.gnu.org/licenses/>.

  Consult the COPYING file in the top-level source directory of this
  module for the precise wording of the license and the list of
  copyright holders.
*/
#ifndef EWOMS_BLACK_OIL_RATE_VECTOR_HH
#define EWOMS_BLACK_OIL_RATE_VECTOR_HH

#include <dune/common/fvector.hh>

#include <opm/material/common/MathToolbox.hpp>
#include <opm/material/common/Valgrind.hpp>
#include <opm/material/constraintsolvers/NcpFlash.hpp>

#include <opm/models/blackoil/blackoilbioeffectsmodules.hh>
#include <opm/models/blackoil/blackoilbrinemodules.hh>
#include <opm/models/blackoil/blackoilfoammodules.hh>
#include <opm/models/blackoil/blackoilpolymermodules.hh>
#include <opm/models/blackoil/blackoilsolventmodules.hh>
#include <opm/models/common/multiphasebaseproperties.hh>
#include <opm/models/discretization/common/fvbaseproperties.hh>

#include <stdexcept>

namespace Opm {

template <class TypeTag>
class BlackOilRateVector
    : public Dune::FieldVector<GetPropType<TypeTag, Properties::Evaluation>,
                               getPropValue<TypeTag, Properties::NumEq>()>
{
    using Scalar = GetPropType<TypeTag, Properties::Scalar>;
    using Evaluation = GetPropType<TypeTag, Properties::Evaluation>;
    using FluidSystem = GetPropType<TypeTag, Properties::FluidSystem>;
    using Indices = GetPropType<TypeTag, Properties::Indices>;

    using SolventModule = BlackOilSolventModule<TypeTag>;
    using PolymerModule = BlackOilPolymerModule<TypeTag>;
    using FoamModule = BlackOilFoamModule<TypeTag>;
    using BrineModule = BlackOilBrineModule<TypeTag>;

    enum { numEq = getPropValue<TypeTag, Properties::NumEq>() };
    enum { numComponents = getPropValue<TypeTag, Properties::NumComponents>() };
    enum { conti0EqIdx = Indices::conti0EqIdx };
    enum { enableSolvent = getPropValue<TypeTag, Properties::EnableSolvent>() };
    enum { enablePolymer = getPropValue<TypeTag, Properties::EnablePolymer>() };
    enum { enablePolymerMolarWeight = getPropValue<TypeTag, Properties::EnablePolymerMW>() };
    enum { enableFoam = getPropValue<TypeTag, Properties::EnableFoam>() };
    enum { enableBrine = getPropValue<TypeTag, Properties::EnableBrine>() };
    enum { enableBioeffects = getPropValue<TypeTag, Properties::EnableBioeffects>() };
    using Toolbox = MathToolbox<Evaluation>;
    using ParentType = Dune::FieldVector<Evaluation, numEq>;

public:
    BlackOilRateVector() : ParentType()
    { Valgrind::SetUndefined(*this); }

    BlackOilRateVector(Scalar value) : ParentType(Toolbox::createConstant(value))
    {}

    void setMassRate(const ParentType& value, unsigned pvtRegionIdx = 0)
    {
        ParentType::operator=(value);

        // convert to "surface volume" if requested
        if constexpr (getPropValue<TypeTag, Properties::BlackoilConserveSurfaceVolume>()) {
            if (FluidSystem::phaseIsActive(FluidSystem::gasPhaseIdx)) {
                (*this)[FluidSystem::canonicalToActiveCompIdx(FluidSystem::gasCompIdx)] /=
                        FluidSystem::referenceDensity(FluidSystem::gasPhaseIdx, pvtRegionIdx);
            }
            if (FluidSystem::phaseIsActive(FluidSystem::oilPhaseIdx)) {
                (*this)[FluidSystem::canonicalToActiveCompIdx(FluidSystem::oilCompIdx)] /=
                        FluidSystem::referenceDensity(FluidSystem::oilPhaseIdx, pvtRegionIdx);
            }
            if (FluidSystem::phaseIsActive(FluidSystem::waterPhaseIdx)) {
                (*this)[FluidSystem::canonicalToActiveCompIdx(FluidSystem::waterCompIdx)] /=
                        FluidSystem::referenceDensity(FluidSystem::waterPhaseIdx, pvtRegionIdx);
            }
            if constexpr (enableSolvent) {
                const auto& solventPvt = SolventModule::solventPvt();
                (*this)[Indices::contiSolventEqIdx] /=
                        solventPvt.referenceDensity(pvtRegionIdx);
            }
        }
    }

    void setMolarRate(const ParentType& value, unsigned pvtRegionIdx = 0)
    {
        // first, assign molar rates
        ParentType::operator=(value);

        // then, convert them to mass rates
        for (unsigned compIdx = 0; compIdx < numComponents; ++compIdx) {
            (*this)[conti0EqIdx + compIdx] *= FluidSystem::molarMass(compIdx, pvtRegionIdx);
        }

        const auto& solventPvt = SolventModule::solventPvt();
        (*this)[Indices::contiSolventEqIdx] *= solventPvt.molarMass(pvtRegionIdx);

        if constexpr (enablePolymer) {
            if constexpr (enablePolymerMolarWeight) {
                throw std::logic_error("Set molar rate with polymer weight tracking not implemented");
            }

            (*this)[Indices::contiPolymerEqIdx] *= PolymerModule::molarMass(pvtRegionIdx);
        }

        if constexpr (enableFoam) {
            throw std::logic_error("setMolarRate() not implemented for foam");
        }

        if constexpr (enableBrine) {
            throw std::logic_error("setMolarRate() not implemented for salt water");
        }

        if constexpr (enableBioeffects) {
            throw std::logic_error("setMolarRate() not implemented for bioeffects (biofilm/MICP)");
        }

        // convert to "surface volume" if requested
        if constexpr (getPropValue<TypeTag, Properties::BlackoilConserveSurfaceVolume>()) {
            if (FluidSystem::phaseIsActive(FluidSystem::gasPhaseIdx)) {
                (*this)[FluidSystem::canonicalToActiveCompIdx(FluidSystem::gasCompIdx)] /=
                        FluidSystem::referenceDensity(FluidSystem::gasPhaseIdx, pvtRegionIdx);
            }
            if (FluidSystem::phaseIsActive(FluidSystem::oilPhaseIdx)) {
                (*this)[FluidSystem::canonicalToActiveCompIdx(FluidSystem::oilCompIdx)] /=
                        FluidSystem::referenceDensity(FluidSystem::oilPhaseIdx, pvtRegionIdx);
            }
            if (FluidSystem::phaseIsActive(FluidSystem::waterPhaseIdx)) {
                (*this)[FluidSystem::canonicalToActiveCompIdx(FluidSystem::waterCompIdx)] /=
                        FluidSystem::referenceDensity(FluidSystem::waterPhaseIdx, pvtRegionIdx);
            }
            if constexpr (enableSolvent) {
                (*this)[Indices::contiSolventEqIdx] /=
                        solventPvt.referenceDensity(pvtRegionIdx);
            }
        }
    }

    template <class FluidState, class RhsEval>
    void setVolumetricRate(const FluidState& fluidState,
                           unsigned phaseIdx,
                           const RhsEval& volume)
    {
        for (unsigned compIdx = 0; compIdx < numComponents; ++compIdx) {
            (*this)[conti0EqIdx + compIdx] =
                fluidState.density(phaseIdx) *
                fluidState.massFraction(phaseIdx, compIdx) *
                volume;
        }
    }

    template <class RhsEval>
    BlackOilRateVector& operator=(const RhsEval& value)
    {
        for (unsigned i = 0; i < this->size(); ++i) {
            (*this)[i] = value;
        }
        return *this;
    }
};

} // namespace Opm

#endif