#include <segment.hpp>
◆ RstSegment()
Opm::RestartIO::RstSegment::RstSegment |
( |
const ::Opm::UnitSystem & |
unit_system, |
|
|
int |
segment_number, |
|
|
const int * |
iseg, |
|
|
const double * |
rseg |
|
) |
| |
◆ area
double Opm::RestartIO::RstSegment::area |
◆ base_strength
double Opm::RestartIO::RstSegment::base_strength |
◆ bhp_ref_dz
double Opm::RestartIO::RstSegment::bhp_ref_dz |
◆ branch
int Opm::RestartIO::RstSegment::branch |
◆ critical_water_fraction
double Opm::RestartIO::RstSegment::critical_water_fraction |
◆ diameter
double Opm::RestartIO::RstSegment::diameter |
◆ dist_bhp_ref
double Opm::RestartIO::RstSegment::dist_bhp_ref |
◆ dist_outlet
double Opm::RestartIO::RstSegment::dist_outlet |
◆ fluid_density
double Opm::RestartIO::RstSegment::fluid_density |
◆ fluid_viscosity
double Opm::RestartIO::RstSegment::fluid_viscosity |
◆ gas_flow_fraction
double Opm::RestartIO::RstSegment::gas_flow_fraction |
◆ icd_length
double Opm::RestartIO::RstSegment::icd_length |
◆ icd_scaling_mode
int Opm::RestartIO::RstSegment::icd_scaling_mode |
◆ icd_status
ICDStatus Opm::RestartIO::RstSegment::icd_status |
◆ inflow_segments
std::vector<int> Opm::RestartIO::RstSegment::inflow_segments |
◆ max_emulsion_ratio
double Opm::RestartIO::RstSegment::max_emulsion_ratio |
◆ max_valid_flow_rate
double Opm::RestartIO::RstSegment::max_valid_flow_rate |
◆ outlet_dz
double Opm::RestartIO::RstSegment::outlet_dz |
◆ outlet_segment
int Opm::RestartIO::RstSegment::outlet_segment |
◆ pressure
double Opm::RestartIO::RstSegment::pressure |
◆ roughness
double Opm::RestartIO::RstSegment::roughness |
◆ segment
int Opm::RestartIO::RstSegment::segment |
◆ segment_type
◆ total_flow
double Opm::RestartIO::RstSegment::total_flow |
◆ transition_region_width
double Opm::RestartIO::RstSegment::transition_region_width |
◆ valve_area
double Opm::RestartIO::RstSegment::valve_area |
◆ valve_area_fraction
double Opm::RestartIO::RstSegment::valve_area_fraction |
◆ valve_flow_coeff
double Opm::RestartIO::RstSegment::valve_flow_coeff |
◆ valve_length
double Opm::RestartIO::RstSegment::valve_length |
◆ valve_max_area
double Opm::RestartIO::RstSegment::valve_max_area |
◆ volume
double Opm::RestartIO::RstSegment::volume |
◆ water_flow_fraction
double Opm::RestartIO::RstSegment::water_flow_fraction |
The documentation for this struct was generated from the following file: