[Opm] (no subject)

[Alf Birger Rustad]

I meant to say, Red Hat packages do *not* have MPI support :-)
________________________________
Fra: Opm <opm-bounces at opm-project.org> på vegne av Alf Birger Rustad <abir at statoil.com>
Sendt: 15. april 2018 22:53:02
Til: Atgeirr Rasmussen; opm at opm-project.org
Emne: Re: [Opm] (no subject)


Please note that the Red Hat packages do have MPI support. You will need to compile from source, and to get load balancing, you will need to also compile and link in zoltan.


Cheers,

Alf


________________________________
Fra: Opm <opm-bounces at opm-project.org> på vegne av Atgeirr Rasmussen <Atgeirr.Rasmussen at sintef.no>
Sendt: 15. april 2018 21:39
Til: opm at opm-project.org
Emne: Re: [Opm] (no subject)


Dear Abdelmoumen,


Installing and running the RHEL binary packages could work, but there could be things that make your HPC system different from a standard RHEL system, causing incompatibilities. You could try, and report how it goes?


Atgeirr


________________________________
Frå: Opm <opm-bounces at opm-project.org> på vegne av bacetti abdelmoumen <bacetti.abdelmoumen at gmail.com>
Sendt: fredag 13. april 2018 16:20
Til: opm at opm-project.org
Emne: Re: [Opm] (no subject)

Dear Mr. Atgeirr,

Regarding what you have said on Ubuntu binary, is it possible to the same on Redhat (which the system used on the HPC)?

Abdelmoumen



Regards/Cordialement

Abdelmoumen Bacetti

abdelmoumen.bacetti at sonatrach.dz<mailto:abdelmoumen.bacetti at sonatrach.dz>
bacetti.abdelmoumen at gmail.com<mailto:bacetti.abdelmoumen at gmail.com>
Linkedin<https://www.linkedin.com/in/abdelmoumen-bacetti-01a46b138/>   &    Researchgate<https://www.researchgate.net/profile/Abdelmoumen_Bacetti2>

On Fri, Apr 13, 2018 at 8:24 AM, Atgeirr Rasmussen <Atgeirr.Rasmussen at sintef.no<mailto:Atgeirr.Rasmussen at sintef.no>> wrote:

Dear Mr. Abdelmoumen,


I recommend that you try running OPM Flow on HPC systems using the Singularity container system. You should ask your HPC maintainer if Singularity is supported. If not, Docker containers are also available, but will probably not be able to exploit the special hardware typically present in an HPC system.


Also, if you can run a Ubuntu binary on the system, you can install the binary packages for Ubuntu 16.04 as explained on the OPM web site:


https://opm-project.org/?page_id=36


All of the preceding options are compiled with MPI, meaning that the Flow executable can be run with mpirun in parallel.


Finally, there is a new release underway, before the end of the month a new version is available.


Atgeirr


________________________________
Frå: Opm <opm-bounces at opm-project.org<mailto:opm-bounces at opm-project.org>> på vegne av bacetti abdelmoumen <bacetti.abdelmoumen at gmail.com<mailto:bacetti.abdelmoumen at gmail.com>>
Sendt: 12. april 2018 17:07
Til: opm at opm-project.org<mailto:opm at opm-project.org>
Emne: [Opm] (no subject)

Willing to run OPM on the university HPC, is there any parallel version of OPM's binary or does the HPC admin have to compile it from source for that.

If it is required to compile the source to get a parallel version, what are the compiler options?

_______________________________________________
Opm mailing list
Opm at opm-project.org<mailto:Opm at opm-project.org>
https://opm-project.org/cgi-bin/mailman/listinfo/opm




-------------------------------------------------------------------
The information contained in this message may be CONFIDENTIAL and is
intended for the addressee only. Any unauthorized use, dissemination of the
information or copying of this message is prohibited. If you are not the
addressee, please notify the sender immediately by return e-mail and delete
this message.
Thank you


-------------------------------------------------------------------
The information contained in this message may be CONFIDENTIAL and is
intended for the addressee only. Any unauthorized use, dissemination of the
information or copying of this message is prohibited. If you are not the
addressee, please notify the sender immediately by return e-mail and delete
this message.
Thank you
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <//opm-project.org/pipermail/opm/attachments/20180415/9f04ffcc/attachment.html>