[Opm] 4th candidate for 2019.10 release

Wed Nov 13 10:15:11 UTC 2019

Hi, Lorenzo,

OPM-flow does not provide facility for grid or DATA file generation.

If you can edit the DATA file, I think it is not hard to do the five spot with polymer injection with water/oil reservoir.

For this specific requirement, Cartesian grid is sufficient.

If you check the example 2D_OILWATER_POLYMER.DATA, the dimension of the grid is defined as follows,

DIMENS
20 1 5 /

in the GRID section,  there are more information about the grid,

DX
100*200 /
DY
100*200 /
DZ
100*25 /

TOPS
20*2500
20*2525
20*2550
20*2575
20*2600 /

Basically, it defines a Cartesian grid with 20 X 1 X 5 in x, y and z direction respectively, and the size of each grid cell is 100 X 100 X 25 .

After modify the grid setup, you also need to change the PORO, PERMX, PERMY, and PERMZ and also redefine the well location and setup.

I think it is not hard to change this deck for your purpose. And more information about the format of the DATA file can be found in the manual.

https://opm-project.org/?page_id=955

Hopefully, the above information is helpful to you.

Best,
Kai

________________________________
From: Opm <opm-bounces at opm-project.org> on behalf of lc <lorenzo.campoli at uniroma1.it>
Sent: Wednesday, November 13, 2019 8:39 AM
To: opm at opm-project.org <opm at opm-project.org>
Subject: Re: [Opm] 4th candidate for 2019.10 release

Hello dear OPM community,

I successfully checkedout to the new release and I'm going with some
testing, specifically, polymer injection scenarios in water/oil. I run
without problems.

In this regards, I'd like to ask wheher/how is it possible to set up a
simulation for a five spot pattern scenario, thus with vertical wells
with polymer injection in water/oil.

I don't find any example, for the grid generation as well.

Thank you,

Kind regards,

Lorenzo Campoli

On 12.11.2019 17:57, Arne Morten Kvarving wrote:
> rc4 builds are now in testing ppa for xenial and bionic (done building, might take 30 mins before they published).
> ________________________________
> Fra: Opm <opm-bounces at opm-project.org> på vegne av Markus Blatt <markus at dr-blatt.de>
> Sendt: tirsdag 12. november 2019 15:36
> Til: opm at opm-project.org <opm at opm-project.org>
> Emne: [Opm] 4th candidate for 2019.10 release
>
> Hi,
>
> third time is the charm, does not seem to hold here.
>
> This morning a tagged a another release candidate. You get it from git,
> by "git checkout release/2019.10/rc4" after fetching updates for each module.
>
> Arne Morton will provide binary packages (at least for Ubuntu) in due time.
>
> It would be nice if everyboday would do some testing. No report will be
> interpreted as "works for me". Optimistic as I am, I intend to tag the
> final release on Friday.
>
> What changed since rc3 is:
> opm-common: PRs 1068 (improvements related to Aquifer modeling) and 1113 (Apply
>     Multz to edit section) have been backported.
> opm-simulators: Print number of OMP threads and MPI processors
>
> Happy testing!
>
> Cheers,
>
> Markus
> --
> Dr. Markus Blatt - HPC-Simulation-Software & Services https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.dr-blatt.de&data=02%7C01%7Ckai.bao%40sintef.no%7C56e7658886e64847ce3708d7680cc045%7Ce1f00f39604145b0b309e0210d8b32af%7C1%7C1%7C637092276279212684&sdata=Me5r7at2HcRTh9J6bFeAt65SZ3NFT99gDVs46kmzRns%3D&reserved=0
> Pedettistr. 38, 85072 Eichstaett, Germany,  USt-Id: DE279960836
> Tel.: +49 (0) 160 97590858
> _______________________________________________
> Opm mailing list
> Opm at opm-project.org
> https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fopm-project.org%2Fcgi-bin%2Fmailman%2Flistinfo%2Fopm&data=02%7C01%7Ckai.bao%40sintef.no%7C56e7658886e64847ce3708d7680cc045%7Ce1f00f39604145b0b309e0210d8b32af%7C1%7C1%7C637092276279222671&sdata=PAIi3T%2FZu5vn1vNkYP2ze%2FEh7i48h1jpsPOqOVt9Q1w%3D&reserved=0
> _______________________________________________
> Opm mailing list
> Opm at opm-project.org
> https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fopm-project.org%2Fcgi-bin%2Fmailman%2Flistinfo%2Fopm&data=02%7C01%7Ckai.bao%40sintef.no%7C56e7658886e64847ce3708d7680cc045%7Ce1f00f39604145b0b309e0210d8b32af%7C1%7C1%7C637092276279222671&sdata=PAIi3T%2FZu5vn1vNkYP2ze%2FEh7i48h1jpsPOqOVt9Q1w%3D&reserved=0

--
________________________________________________________
Le informazioni
contenute in questo messaggio di posta elettronica sono strettamente
riservate e indirizzate esclusivamente al destinatario. Si prega di non
leggere, fare copia, inoltrare a terzi o conservare tale messaggio se non
si è il legittimo destinatario dello stesso. Qualora tale messaggio sia
stato ricevuto per errore, si prega di restituirlo al mittente e di
cancellarlo permanentemente dal proprio computer.

The information
contained in this e mail message is strictly confidential and intended for
the use of the addressee only.  If you are not the intended recipient,
please do not read, copy, forward or store it on your computer. If you have
received the message in error, please forward it back to the sender and
delete it permanently from your computer system.
_______________________________________________
Opm mailing list
Opm at opm-project.org
https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fopm-project.org%2Fcgi-bin%2Fmailman%2Flistinfo%2Fopm&data=02%7C01%7Ckai.bao%40sintef.no%7C56e7658886e64847ce3708d7680cc045%7Ce1f00f39604145b0b309e0210d8b32af%7C1%7C1%7C637092276279222671&sdata=PAIi3T%2FZu5vn1vNkYP2ze%2FEh7i48h1jpsPOqOVt9Q1w%3D&reserved=0