[Opm] PRT Files

[Alf Birger Rustad]

Hi Bob,

Your understanding is correct. We did debug the PAV calculations right before the release, so there might still be some rough edges. Can you please share what version of flow you are using, is it the 2016.10 release or fresh from git? Can you also share what SPE1 deck you are using. Is it from opm-data, and if so, is it case 1 or 2.

Thanks for testing and reporting!

Cheers,
Alf

________________________________________
From: Opm [opm-bounces at opm-project.org] on behalf of bobmerrill at mersep.com [bobmerrill at mersep.com]
Sent: Friday, December 16, 2016 2:59 AM
To: opm at opm-project.org
Subject: [Opm] PRT Files

Dear OPM List:

I am a new user to Flow; I am just beginning to experiment with the
keywords to see which work and which don't.

I am not a skilled programmer (no C; some (old) Fortran; reasonable Perl
and VBA).

I am a fairly experienced reservoir engineer.  And I'm confused about the
output in the PRT files.  A report is printed which is called "Field
Totals".  It lists a quantity called "PAV" which I assume to be the
average HCPV weighted pressure.  But is lists a value around 334 (in both
SPE1 and in a case I built from scratch).  I'm pretty sure that the
reservoir pressure is NOT 334; I have BHP constrants of 4800 (producer)
and 5100 (injector).

So what is it?  If it's not what it says, are the volumes in place correct?

Many thanks.

Bob Merrill


_______________________________________________
Opm mailing list
Opm at opm-project.org
http://opm-project.org/cgi-bin/mailman/listinfo/opm


-------------------------------------------------------------------
The information contained in this message may be CONFIDENTIAL and is
intended for the addressee only. Any unauthorised use, dissemination of the
information or copying of this message is prohibited. If you are not the
addressee, please notify the sender immediately by return e-mail and delete
this message.
Thank you