[Opm] Opm Digest, Vol 74, Issue 2: Problems running ECLIPSE model using FLOW.

[OPM User]

Alun,

There well may be consistencies with the code base and the manual, as 
you can see from below.

*Question**
* 	*Answer**
*
GRIDUNIT: keyword not supported
   In file: PP11B_MID_CASE_23W_0000.data, line 86
	The manual states that:

The GRIDUNIT keyword defines the units of the grid data. It is usually 
output by pre-processing software
when exporting the grid geometry. The data is not used by OPM Flow 
intrinsically, but is merely written to
the output EGRID file, as specified by the GRIDFILE keyword, for the use 
of post-processing software like
OPM ResInsight.

So you can ignore this.
COORDSYS: keyword not supported
   In file: PP11B_MID_CASE_23W_0000.data, line 92
	This keyword is marked as unsupported in the 2021-10 (Rev-0) of the 
manual, so the message is correct.
MINPORV: keyword not supported
   In file: PP11B_MID_CASE_23W_0000.data, line 96
	This keyword is marked as unsupported in the 2021-10 (Rev-0) of the 
manual, so the message is correct.
Warning: Unhandled summary keyword WBP
In 
/home/alun/opm-data-master/sealion/Phase_40/include_2021/BASE_H14_UO4_451_SUM_OPM.INC 
line 171

Warning: Unhandled summary keyword WBP9
In 
/home/alun/opm-data-master/sealion/Phase_40/include_2021/BASE_H14_UO4_451_SUM_OPM.INC 
line 174
	The messages are correct and the manual is not.

This vector, as well as the other WBP* vectors were being developed but 
the code has not been completed, I have updated the manual accordingly 
for the 2022-04 release.


One question, are you using the latest version of the manual, that is 
2021-10 (Rev-0)? The manual is updated with each release.

Regarding:

    /According to the PRT file, there are no errors but FLOW stops
    working with the message "Program threw an exception.  Evaluation
    function for: GEFF not found"
    /

Can you either send me the model or at least the *.DBG and *.PRT files, 
and when I have a minute I'll take a look.

OPM User
opmuser0 at gmail.com

------------------------------------------------------------------------
On 19-Apr-22 21:09, opm-request at opm-project.org wrote:

[Opm] Problems running ECLIPSE model using FLOW.eml

Subject:
[Opm] Problems running ECLIPSE model using FLOW
From:
Alun Griffiths <Alun.Griffiths at rockhopperexploration.co.uk>
Date:
19-Apr-22, 21:07

To:
"opm at opm-project.org" <opm at opm-project.org>


Hi

I am trying to run an existing ECLIPSE model using OPM and there seem to be a few issues:
1.            FLOW lists a number of keywords which it says are not supported but the ones I checked are described in the FLOW manual.  For example:

Warning: Unsupported keywords or keyword items:

   GRIDUNIT: keyword not supported
   In file: PP11B_MID_CASE_23W_0000.data, line 86

   COORDSYS: keyword not supported
   In file: PP11B_MID_CASE_23W_0000.data, line 92

   MINPORV: keyword not supported
   In file: PP11B_MID_CASE_23W_0000.data, line 96

2.            FLOW lists several unhandled SUMMARY keywords but, again, most of these are supported.  For example:

Warning: Unhandled summary keyword WBP
In /home/alun/opm-data-master/sealion/Phase_40/include_2021/BASE_H14_UO4_451_SUM_OPM.INC line 171

Warning: Unhandled summary keyword WBP9
In /home/alun/opm-data-master/sealion/Phase_40/include_2021/BASE_H14_UO4_451_SUM_OPM.INC line 174

3.            According to the PRT file, there are no errors but FLOW stops working with the message "Program threw an exception.  Evaluation function for: GEFF not found"

Would appreciate any thoughts you might have

Best regards

Alun Griffiths
[http://rockhopperexploration.co.uk/signatures/images/spacer.png]
[http://rockhopperexploration.co.uk/signatures/images/spacer.png]
[Rockhopper Exploration plc]<http://rockhopperexploration.co.uk>         [http://rockhopperexploration.co.uk/signatures/images/spacer.png]