Material properties of pure water $H_2O$ . More...

#include <H2O.hpp>

Inheritance diagram for Opm::H2O< Scalar >:

Public Types
typedef Scalar	Scalar

Static Public Member Functions
static const char *	name ()
	A human readable name for the water. More...

static const Scalar	molarMass ()
	The molar mass in $\mathrm{[kg/mol]}$ of water. More...

static const Scalar	acentricFactor ()
	The acentric factor $\mathrm{[-]}$ of water. More...

static const Scalar	criticalTemperature ()
	Returns the critical temperature $\mathrm{[K]}$ of water. More...

static const Scalar	criticalPressure ()
	Returns the critical pressure $\mathrm{[Pa]}$ of water. More...

static const Scalar	criticalMolarVolume ()
	Returns the molar volume $\mathrm{[m^3/mol]}$ of water at the critical point. More...

static const Scalar	tripleTemperature ()
	Returns the temperature $\mathrm{[K]}$ at water's triple point. More...

static const Scalar	triplePressure ()
	Returns the pressure $\mathrm{[Pa]}$ at water's triple point. More...

template<class Evaluation >
static Evaluation	vaporPressure (Evaluation temperature)
	The vapor pressure in $\mathrm{[Pa]}$ of pure water at a given temperature. More...

template<class Evaluation >
static Evaluation	vaporTemperature (const Evaluation &pressure)
	The vapor temperature in $\mathrm{[Ka]}$ of pure water at a given pressure. More...

template<class Evaluation >
static Evaluation	gasEnthalpy (const Evaluation &temperature, const Evaluation &pressure)
	Specific enthalpy of water steam $\mathrm{[J/kg]}$ . More...

template<class Evaluation >
static Evaluation	liquidEnthalpy (const Evaluation &temperature, const Evaluation &pressure)
	Specific enthalpy of liquid water $\mathrm{[J/kg]}$ . More...

template<class Evaluation >
static Evaluation	gasHeatCapacity (const Evaluation &temperature, const Evaluation &pressure)
	Specific isobaric heat capacity of water steam $\mathrm{[J/kg]}$ . More...

template<class Evaluation >
static Evaluation	liquidHeatCapacity (const Evaluation &temperature, const Evaluation &pressure)
	Specific isobaric heat capacity of liquid water $\mathrm{[J/kg]}$ . More...

template<class Evaluation >
static Evaluation	liquidInternalEnergy (const Evaluation &temperature, const Evaluation &pressure)
	Specific internal energy of liquid water $\mathrm{[J/kg]}$ . More...

template<class Evaluation >
static Evaluation	gasInternalEnergy (const Evaluation &temperature, const Evaluation &pressure)
	Specific internal energy of steam and water vapor $\mathrm{[J/kg]}$ . More...

template<class Evaluation >
static Evaluation	liquidHeatCapacityConstVolume (const Evaluation &temperature, const Evaluation &pressure)
	Specific isochoric heat capacity of liquid water $\mathrm{[J/m^3]}$ . More...

template<class Evaluation >
static Evaluation	gasHeatCapacityConstVolume (const Evaluation &temperature, const Evaluation &pressure)
	Specific isochoric heat capacity of steam and water vapor $\mathrm{[J/kg]}$ . More...

static bool	gasIsCompressible ()
	Returns true iff the gas phase is assumed to be compressible. More...

static bool	liquidIsCompressible ()
	Returns true iff the liquid phase is assumed to be compressible. More...

template<class Evaluation >
static Evaluation	gasDensity (const Evaluation &temperature, const Evaluation &pressure)
	The density of steam in $\mathrm{[kg/m^3]}$ at a given pressure and temperature. More...

static bool	gasIsIdeal ()
	Returns true iff the gas phase is assumed to be ideal. More...

template<class Evaluation >
static Evaluation	gasPressure (const Evaluation &temperature, Scalar density)
	The pressure of steam in $\mathrm{[Pa]}$ at a given density and temperature. More...

template<class Evaluation >
static Evaluation	liquidDensity (const Evaluation &temperature, const Evaluation &pressure)
	The density of pure water in $\mathrm{[kg/m^3]}$ at a given pressure and temperature. More...

template<class Evaluation >
static Evaluation	liquidPressure (const Evaluation &temperature, Scalar density)
	The pressure of liquid water in $\mathrm{[Pa]}$ at a given density and temperature. More...

template<class Evaluation >
static Evaluation	gasViscosity (const Evaluation &temperature, const Evaluation &pressure)
	The dynamic viscosity $\mathrm{[Pa*s]}$ of steam. More...

template<class Evaluation >
static Evaluation	liquidViscosity (const Evaluation &temperature, const Evaluation &pressure)
	The dynamic viscosity $\mathrm{[Pa*s]}$ of pure water. More...

template<class Evaluation >
static Evaluation	liquidThermalConductivity (const Evaluation &temperature, const Evaluation &pressure)
	Thermal conductivity $\mathrm{[[W/(m K)]}$ of water (IAPWS) . More...

template<class Evaluation >
static Evaluation	gasThermalConductivity (const Evaluation &temperature, const Evaluation &pressure)
	Thermal conductivity $\mathrm{[[W/(m K)]}$ of water (IAPWS) . More...

static void	init (Scalar, Scalar, unsigned, Scalar, Scalar, unsigned)
	A default routine for initialization, not needed for components and must not be called. More...

static Evaluation	vaporPressure (const Evaluation &)
	The vapor pressure in $\mathrm{[Pa]}$ of the component at a given temperature in $\mathrm{[K]}$ . More...

Static Public Attributes
static const bool	isTabulated

Detailed Description

template<class Scalar>
class Opm::H2O< Scalar >

Material properties of pure water $H_2O$ .

Template Parameters

Scalar The type used for scalar values

See:

IAPWS: "Revised Release on the IAPWS Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam", http://www.iapws.org/relguide/IF97-Rev.pdf

Member Typedef Documentation

typedef Scalar Opm::Component< Scalar , H2O< Scalar > >::Scalar

inherited

Member Function Documentation

template<class Scalar >

static const Scalar Opm::H2O< Scalar >::acentricFactor ( )

inlinestatic

The acentric factor $\mathrm{[-]}$ of water.

References Opm::IAPWS::Common< Scalar >::acentricFactor.

Referenced by Opm::FluidSystems::H2ON2LiquidPhase< Scalar, useComplexRelations >::acentricFactor(), Opm::FluidSystems::H2OAir< Scalar, H2Otype, useComplexRelations >::acentricFactor(), Opm::FluidSystems::H2ON2< Scalar, useComplexRelations >::acentricFactor(), and Opm::FluidSystems::Spe5< Scalar >::acentricFactor().

template<class Scalar >

static const Scalar Opm::H2O< Scalar >::criticalMolarVolume ( )

inlinestatic

Returns the molar volume $\mathrm{[m^3/mol]}$ of water at the critical point.

References Opm::IAPWS::Common< Scalar >::criticalMolarVolume.

Referenced by Opm::FluidSystems::Spe5< Scalar >::criticalMolarVolume().

template<class Scalar >

static const Scalar Opm::H2O< Scalar >::criticalPressure ( )

inlinestatic

Returns the critical pressure $\mathrm{[Pa]}$ of water.

References Opm::IAPWS::Common< Scalar >::criticalPressure.

Referenced by Opm::Brine< Scalar, H2O >::criticalPressure(), Opm::FluidSystems::H2OAir< Scalar, H2Otype, useComplexRelations >::criticalPressure(), Opm::FluidSystems::Spe5< Scalar >::criticalPressure(), and Opm::H2O< Scalar >::vaporTemperature().

template<class Scalar >

static const Scalar Opm::H2O< Scalar >::criticalTemperature ( )

inlinestatic

Returns the critical temperature $\mathrm{[K]}$ of water.

References Opm::IAPWS::Common< Scalar >::criticalTemperature.

Referenced by Opm::Brine< Scalar, H2O >::criticalTemperature(), Opm::FluidSystems::H2OAir< Scalar, H2Otype, useComplexRelations >::criticalTemperature(), Opm::FluidSystems::Spe5< Scalar >::criticalTemperature(), Opm::henryIAPWS(), and Opm::H2O< Scalar >::vaporPressure().

template<class Scalar >

template<class Evaluation >

static Evaluation Opm::H2O< Scalar >::gasDensity	(	const Evaluation &	temperature,
		const Evaluation &	pressure
	)

inlinestatic

The density of steam in $\mathrm{[kg/m^3]}$ at a given pressure and temperature.

See:

IAPWS: "Revised Release on the IAPWS Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam", http://www.iapws.org/relguide/IF97-Rev.pdf

Parameters

temperature	Absolute temperature of the fluid in $\mathrm{[K]}$
pressure	Phase pressure in $\mathrm{[Pa]}$

References Opm::IdealGas< Scalar >::density(), Opm::IAPWS::Region2< Scalar >::isValid(), Opm::H2O< Scalar >::molarMass(), Opm::H2O< Scalar >::triplePressure(), and Opm::H2O< Scalar >::vaporPressure().

Referenced by Opm::FluidSystems::H2OAirXylene< Scalar >::density(), Opm::FluidSystems::H2OAir< Scalar, H2Otype, useComplexRelations >::density(), Opm::Brine< Scalar, H2O >::gasDensity(), Opm::H2O< Scalar >::gasPressure(), Opm::H2O< Scalar >::gasThermalConductivity(), and Opm::H2O< Scalar >::gasViscosity().

template<class Scalar >

template<class Evaluation >

static Evaluation Opm::H2O< Scalar >::gasEnthalpy	(	const Evaluation &	temperature,
		const Evaluation &	pressure
	)

inlinestatic

Specific enthalpy of water steam $\mathrm{[J/kg]}$ .

See:

IAPWS: "Revised Release on the IAPWS Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam", http://www.iapws.org/relguide/IF97-Rev.pdf

Parameters

temperature	Absolute temperature of the fluid in $\mathrm{[K]}$
pressure	Phase pressure in $\mathrm{[Pa]}$

References Opm::IAPWS::Region2< Scalar >::ddgamma_dtaudpi(), Opm::IAPWS::Region2< Scalar >::dpi_dp(), Opm::IAPWS::Region2< Scalar >::isValid(), Opm::IAPWS::Region2< Scalar >::tau(), Opm::H2O< Scalar >::triplePressure(), and Opm::H2O< Scalar >::vaporPressure().

Referenced by Opm::FluidSystems::H2OAirXylene< Scalar >::enthalpy(), Opm::FluidSystems::H2OAir< Scalar, H2Otype, useComplexRelations >::enthalpy(), and Opm::Brine< Scalar, H2O >::gasEnthalpy().

template<class Scalar >

template<class Evaluation >

static Evaluation Opm::H2O< Scalar >::gasHeatCapacity	(	const Evaluation &	temperature,
		const Evaluation &	pressure
	)

inlinestatic

Specific isobaric heat capacity of water steam $\mathrm{[J/kg]}$ .

See:

IAPWS: "Revised Release on the IAPWS Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam", http://www.iapws.org/relguide/IF97-Rev.pdf

Parameters

temperature	Absolute temperature of the fluid in $\mathrm{[K]}$
pressure	Phase pressure in $\mathrm{[Pa]}$

References Opm::IAPWS::Region2< Scalar >::isValid(), Opm::H2O< Scalar >::triplePressure(), and Opm::H2O< Scalar >::vaporPressure().

Referenced by Opm::Brine< Scalar, H2O >::gasHeatCapacity().

template<class Scalar >

template<class Evaluation >

static Evaluation Opm::H2O< Scalar >::gasHeatCapacityConstVolume	(	const Evaluation &	temperature,
		const Evaluation &	pressure
	)

inlinestatic

Specific isochoric heat capacity of steam and water vapor $\mathrm{[J/kg]}$ .

See:

IAPWS: "Revised Release on the IAPWS Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam", http://www.iapws.org/relguide/IF97-Rev.pdf

Parameters

temperature	Absolute temperature of the fluid in $\mathrm{[K]}$
pressure	Phase pressure in $\mathrm{[Pa]}$

References Opm::IAPWS::Region2< Scalar >::isValid(), Opm::H2O< Scalar >::triplePressure(), and Opm::H2O< Scalar >::vaporPressure().

template<class Scalar >

template<class Evaluation >

static Evaluation Opm::H2O< Scalar >::gasInternalEnergy	(	const Evaluation &	temperature,
		const Evaluation &	pressure
	)

inlinestatic

Specific internal energy of steam and water vapor $\mathrm{[J/kg]}$ .

See:

IAPWS: "Revised Release on the IAPWS Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam", http://www.iapws.org/relguide/IF97-Rev.pdf

Parameters

temperature	Absolute temperature of the fluid in $\mathrm{[K]}$
pressure	Phase pressure in $\mathrm{[Pa]}$

References Opm::IAPWS::Region2< Scalar >::isValid(), Opm::H2O< Scalar >::triplePressure(), and Opm::H2O< Scalar >::vaporPressure().

template<class Scalar >

static bool Opm::H2O< Scalar >::gasIsCompressible ( )

inlinestatic

Returns true iff the gas phase is assumed to be compressible.

Referenced by Opm::Brine< Scalar, H2O >::gasIsCompressible().

template<class Scalar >

static bool Opm::H2O< Scalar >::gasIsIdeal ( )

inlinestatic

Returns true iff the gas phase is assumed to be ideal.

Referenced by Opm::Brine< Scalar, H2O >::gasIsIdeal(), Opm::FluidSystems::H2OAirXylene< Scalar >::isIdealGas(), and Opm::FluidSystems::H2OAir< Scalar, H2Otype, useComplexRelations >::isIdealGas().

template<class Scalar >

template<class Evaluation >

static Evaluation Opm::H2O< Scalar >::gasPressure	(	const Evaluation &	temperature,
		Scalar	density
	)

inlinestatic

The pressure of steam in $\mathrm{[Pa]}$ at a given density and temperature.

See:

IAPWS: "Revised Release on the IAPWS Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam", http://www.iapws.org/relguide/IF97-Rev.pdf

Parameters

temperature	Absolute temperature of the fluid in $\mathrm{[K]}$
density	Density in $\mathrm{[kg/m^3]}$

References Opm::LocalAd::abs(), Valgrind::CheckDefined(), Opm::H2O< Scalar >::gasDensity(), Opm::H2O< Scalar >::molarMass(), and Opm::IdealGas< Scalar >::pressure().

Referenced by Opm::Brine< Scalar, H2O >::gasPressure().

template<class Scalar >

template<class Evaluation >

static Evaluation Opm::H2O< Scalar >::gasThermalConductivity	(	const Evaluation &	temperature,
		const Evaluation &	pressure
	)

inlinestatic

Thermal conductivity $\mathrm{[[W/(m K)]}$ of water (IAPWS) .

Appendix B: Recommended Interpolating equation for Industrial Use see http://www.iapws.org/relguide/thcond.pdf

Parameters

temperature	Absolute temperature in K
pressure	Phase pressure of the phase in Pa

References Opm::H2O< Scalar >::gasDensity(), and Opm::IAPWS::Common< Scalar >::thermalConductivityIAPWS().

Referenced by Opm::FluidSystems::H2OAir< Scalar, H2Otype, useComplexRelations >::thermalConductivity().

template<class Scalar >

template<class Evaluation >

static Evaluation Opm::H2O< Scalar >::gasViscosity	(	const Evaluation &	temperature,
		const Evaluation &	pressure
	)

inlinestatic

The dynamic viscosity $\mathrm{[Pa*s]}$ of steam.

This method is only valid if pressure is below or at the vapor pressure of water.

See:

IAPWS: "Release on the IAPWS Formulation 2008 for the Viscosity of Ordinary Water Substance", http://www.iapws.org/relguide/visc.pdf

Parameters

temperature	Absolute temperature of the fluid in $\mathrm{[K]}$
pressure	Phase pressure in $\mathrm{[Pa]}$

References Opm::H2O< Scalar >::gasDensity(), Opm::IAPWS::Region2< Scalar >::isValid(), and Opm::IAPWS::Common< Scalar >::viscosity().

Referenced by Opm::Brine< Scalar, H2O >::gasViscosity(), Opm::FluidSystems::H2OAirXylene< Scalar >::viscosity(), and Opm::FluidSystems::H2OAir< Scalar, H2Otype, useComplexRelations >::viscosity().

static void Opm::Component< Scalar , H2O< Scalar > >::init	(	Scalar	,
		Scalar	,
		unsigned	,
		Scalar	,
		Scalar	,
		unsigned
	)

inlinestaticinherited

A default routine for initialization, not needed for components and must not be called.

Parameters

tempMin	The minimum of the temperature range in $\mathrm{[K]}$
tempMax	The maximum of the temperature range in $\mathrm{[K]}$
nTemp	The number of entries/steps within the temperature range
pressMin	The minimum of the pressure range in $\mathrm{[Pa]}$
pressMax	The maximum of the pressure range in $\mathrm{[Pa]}$
nPress	The number of entries/steps within the pressure range

This function throws a warning when called: "No init routine defined - make sure that this is not necessary!"

Referenced by Opm::FluidSystems::H2OAir< Scalar, H2Otype, useComplexRelations >::init().

template<class Scalar >

template<class Evaluation >

static Evaluation Opm::H2O< Scalar >::liquidDensity	(	const Evaluation &	temperature,
		const Evaluation &	pressure
	)

inlinestatic

The density of pure water in $\mathrm{[kg/m^3]}$ at a given pressure and temperature.

See:

IAPWS: "Revised Release on the IAPWS Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam", http://www.iapws.org/relguide/IF97-Rev.pdf

Parameters

temperature	Absolute temperature of the fluid in $\mathrm{[K]}$
pressure	Phase pressure in $\mathrm{[Pa]}$

References Opm::IAPWS::Region1< Scalar >::isValid(), and Opm::H2O< Scalar >::vaporPressure().

Referenced by Opm::FluidSystems::H2OAirXylene< Scalar >::density(), Opm::FluidSystems::H2OAir< Scalar, H2Otype, useComplexRelations >::density(), Opm::Brine< Scalar, H2O >::liquidDensity(), Opm::H2O< Scalar >::liquidPressure(), Opm::H2O< Scalar >::liquidThermalConductivity(), and Opm::H2O< Scalar >::liquidViscosity().

template<class Scalar >

template<class Evaluation >

static Evaluation Opm::H2O< Scalar >::liquidEnthalpy	(	const Evaluation &	temperature,
		const Evaluation &	pressure
	)

inlinestatic

Specific enthalpy of liquid water $\mathrm{[J/kg]}$ .

See:

IAPWS: "Revised Release on the IAPWS Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam", http://www.iapws.org/relguide/IF97-Rev.pdf

Parameters

temperature	Absolute temperature of the fluid in $\mathrm{[K]}$
pressure	Phase pressure in $\mathrm{[Pa]}$

References Opm::IAPWS::Region1< Scalar >::ddgamma_dtaudpi(), Opm::IAPWS::Region1< Scalar >::dpi_dp(), Opm::IAPWS::Region1< Scalar >::isValid(), Opm::IAPWS::Region1< Scalar >::tau(), and Opm::H2O< Scalar >::vaporPressure().

Referenced by Opm::FluidSystems::H2OAirXylene< Scalar >::enthalpy(), Opm::FluidSystems::H2OAir< Scalar, H2Otype, useComplexRelations >::enthalpy(), and Opm::Brine< Scalar, H2O >::liquidEnthalpy().

template<class Scalar >

template<class Evaluation >

static Evaluation Opm::H2O< Scalar >::liquidHeatCapacity	(	const Evaluation &	temperature,
		const Evaluation &	pressure
	)

inlinestatic

Specific isobaric heat capacity of liquid water $\mathrm{[J/kg]}$ .

See:

IAPWS: "Revised Release on the IAPWS Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam", http://www.iapws.org/relguide/IF97-Rev.pdf

Parameters

temperature	Absolute temperature of the fluid in $\mathrm{[K]}$
pressure	Phase pressure in $\mathrm{[Pa]}$

References Opm::IAPWS::Region1< Scalar >::isValid(), and Opm::H2O< Scalar >::vaporPressure().

template<class Scalar >

template<class Evaluation >

static Evaluation Opm::H2O< Scalar >::liquidHeatCapacityConstVolume	(	const Evaluation &	temperature,
		const Evaluation &	pressure
	)

inlinestatic

Specific isochoric heat capacity of liquid water $\mathrm{[J/m^3]}$ .

See:

IAPWS: "Revised Release on the IAPWS Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam", http://www.iapws.org/relguide/IF97-Rev.pdf

Parameters

temperature	Absolute temperature of the fluid in $\mathrm{[K]}$
pressure	Phase pressure in $\mathrm{[Pa]}$

References Opm::IAPWS::Region1< Scalar >::isValid(), and Opm::H2O< Scalar >::vaporPressure().

template<class Scalar >

template<class Evaluation >

static Evaluation Opm::H2O< Scalar >::liquidInternalEnergy	(	const Evaluation &	temperature,
		const Evaluation &	pressure
	)

inlinestatic

Specific internal energy of liquid water $\mathrm{[J/kg]}$ .

See:

IAPWS: "Revised Release on the IAPWS Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam", http://www.iapws.org/relguide/IF97-Rev.pdf

Parameters

temperature	Absolute temperature of the fluid in $\mathrm{[K]}$
pressure	Phase pressure in $\mathrm{[Pa]}$

References Opm::IAPWS::Region1< Scalar >::isValid(), and Opm::H2O< Scalar >::vaporPressure().

template<class Scalar >

static bool Opm::H2O< Scalar >::liquidIsCompressible ( )

inlinestatic

Returns true iff the liquid phase is assumed to be compressible.

Referenced by Opm::FluidSystems::H2OAir< Scalar, H2Otype, useComplexRelations >::isCompressible(), Opm::FluidSystems::H2OAirXylene< Scalar >::isCompressible(), and Opm::Brine< Scalar, H2O >::liquidIsCompressible().

template<class Scalar >

template<class Evaluation >

static Evaluation Opm::H2O< Scalar >::liquidPressure	(	const Evaluation &	temperature,
		Scalar	density
	)

inlinestatic

The pressure of liquid water in $\mathrm{[Pa]}$ at a given density and temperature.

See:

IAPWS: "Revised Release on the IAPWS Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam", http://www.iapws.org/relguide/IF97-Rev.pdf

Parameters

temperature	Absolute temperature of the fluid in $\mathrm{[K]}$
density	Density of the fluid in $\mathrm{[kg/m^3]}$

References Opm::LocalAd::abs(), Opm::H2O< Scalar >::liquidDensity(), and Opm::H2O< Scalar >::vaporPressure().

template<class Scalar >

template<class Evaluation >

static Evaluation Opm::H2O< Scalar >::liquidThermalConductivity	(	const Evaluation &	temperature,
		const Evaluation &	pressure
	)

inlinestatic

Thermal conductivity $\mathrm{[[W/(m K)]}$ of water (IAPWS) .

Appendix B: Recommended Interpolating equation for Industrial Use see http://www.iapws.org/relguide/thcond.pdf

Parameters

temperature	Absolute temperature in K
pressure	Phase pressure of the phase in Pa

References Opm::H2O< Scalar >::liquidDensity(), and Opm::IAPWS::Common< Scalar >::thermalConductivityIAPWS().

Referenced by Opm::FluidSystems::H2OAir< Scalar, H2Otype, useComplexRelations >::thermalConductivity().

template<class Scalar >

template<class Evaluation >

static Evaluation Opm::H2O< Scalar >::liquidViscosity	(	const Evaluation &	temperature,
		const Evaluation &	pressure
	)

inlinestatic

The dynamic viscosity $\mathrm{[Pa*s]}$ of pure water.

See:

IAPWS: "Release on the IAPWS Formulation 2008 for the Viscosity of Ordinary Water Substance", http://www.iapws.org/relguide/visc.pdf

Parameters

temperature	Absolute temperature of the fluid in $\mathrm{[K]}$
pressure	Phase pressure in $\mathrm{[Pa]}$

References Opm::IAPWS::Region1< Scalar >::isValid(), Opm::H2O< Scalar >::liquidDensity(), and Opm::IAPWS::Common< Scalar >::viscosity().

Referenced by Opm::FluidSystems::H2OAirXylene< Scalar >::viscosity(), and Opm::FluidSystems::H2OAir< Scalar, H2Otype, useComplexRelations >::viscosity().

template<class Scalar >

static const Scalar Opm::H2O< Scalar >::molarMass ( )

inlinestatic

The molar mass in $\mathrm{[kg/mol]}$ of water.

References Opm::IAPWS::Common< Scalar >::molarMass.

Referenced by Opm::FluidSystems::H2OAirXylene< Scalar >::density(), Opm::FluidSystems::H2OAir< Scalar, H2Otype, useComplexRelations >::density(), Opm::H2O< Scalar >::gasDensity(), Opm::BinaryCoeff::H2O_Xylene::gasDiffCoeff(), Opm::BinaryCoeff::H2O_Mesitylene::gasDiffCoeff(), Opm::BinaryCoeff::H2O_N2::gasDiffCoeff(), Opm::BinaryCoeff::H2O_CO2::gasDiffCoeff(), Opm::H2O< Scalar >::gasPressure(), Opm::Brine< Scalar, H2O >::molarMass(), Opm::FluidSystems::H2OAirXylene< Scalar >::molarMass(), Opm::FluidSystems::H2OAir< Scalar, H2Otype, useComplexRelations >::molarMass(), Opm::FluidSystems::Spe5< Scalar >::molarMass(), Opm::FluidSystems::H2OAirXylene< Scalar >::viscosity(), and Opm::FluidSystems::H2OAir< Scalar, H2Otype, useComplexRelations >::viscosity().

template<class Scalar >

static const char* Opm::H2O< Scalar >::name ( )

inlinestatic

A human readable name for the water.

Referenced by Opm::FluidSystems::H2OAirXylene< Scalar >::componentName(), Opm::FluidSystems::H2OAir< Scalar, H2Otype, useComplexRelations >::componentName(), and Opm::FluidSystems::Spe5< Scalar >::componentName().

template<class Scalar >

static const Scalar Opm::H2O< Scalar >::triplePressure ( )

inlinestatic

Returns the pressure $\mathrm{[Pa]}$ at water's triple point.

References Opm::IAPWS::Common< Scalar >::triplePressure.

Referenced by Opm::H2O< Scalar >::gasDensity(), Opm::H2O< Scalar >::gasEnthalpy(), Opm::H2O< Scalar >::gasHeatCapacity(), Opm::H2O< Scalar >::gasHeatCapacityConstVolume(), Opm::H2O< Scalar >::gasInternalEnergy(), Opm::Brine< Scalar, H2O >::triplePressure(), and Opm::H2O< Scalar >::vaporTemperature().

template<class Scalar >

static const Scalar Opm::H2O< Scalar >::tripleTemperature ( )

inlinestatic

Returns the temperature $\mathrm{[K]}$ at water's triple point.

References Opm::IAPWS::Common< Scalar >::tripleTemperature.

Referenced by Opm::henryIAPWS(), Opm::Brine< Scalar, H2O >::tripleTemperature(), and Opm::H2O< Scalar >::vaporPressure().

static Evaluation Opm::Component< Scalar , H2O< Scalar > >::vaporPressure ( const Evaluation & )

inlinestaticinherited

The vapor pressure in $\mathrm{[Pa]}$ of the component at a given temperature in $\mathrm{[K]}$ .

Parameters

temperature temperature of the component in $\mathrm{[K]}$

template<class Scalar >

template<class Evaluation >

static Evaluation Opm::H2O< Scalar >::vaporPressure ( Evaluation temperature )

inlinestatic

The vapor pressure in $\mathrm{[Pa]}$ of pure water at a given temperature.

See:

IAPWS: "Revised Release on the IAPWS Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam", http://www.iapws.org/relguide/IF97-Rev.pdf

Parameters

T	Absolute temperature of the system in $\mathrm{[K]}$

References Opm::H2O< Scalar >::criticalTemperature(), Opm::IAPWS::Region4< Scalar >::saturationPressure(), and Opm::H2O< Scalar >::tripleTemperature().

template<class Scalar >

template<class Evaluation >

static Evaluation Opm::H2O< Scalar >::vaporTemperature ( const Evaluation & pressure )

inlinestatic

The vapor temperature in $\mathrm{[Ka]}$ of pure water at a given pressure.

See:

IAPWS: "Revised Release on the IAPWS Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam", http://www.iapws.org/relguide/IF97-Rev.pdf

Parameters

pressure Phase pressure in $\mathrm{[Pa]}$

References Opm::H2O< Scalar >::criticalPressure(), Opm::H2O< Scalar >::triplePressure(), and Opm::IAPWS::Region4< Scalar >::vaporTemperature().

Member Data Documentation

const bool Opm::Component< Scalar , H2O< Scalar > >::isTabulated

staticinherited

Referenced by Opm::FluidSystems::H2OAir< Scalar, H2Otype, useComplexRelations >::init().

The documentation for this class was generated from the following file:

H2O.hpp

Public Types

Static Public Member Functions

Static Public Attributes

Detailed Description

template<class Scalar> class Opm::H2O< Scalar >

Member Typedef Documentation

Member Function Documentation

Member Data Documentation

template<class Scalar>
class Opm::H2O< Scalar >